Growth of CuIn/sub 3/Se/sub 5/ layer on the CuInSe/sub 2/ film and its effect on the photovoltaic properties of In/sub 2/Se/sub 3//CuInSe/sub 2/ solar cells

S. Kwon, Sung Chan Park, B. Ahn, K. Yoon, Jinsoo Song
{"title":"Growth of CuIn/sub 3/Se/sub 5/ layer on the CuInSe/sub 2/ film and its effect on the photovoltaic properties of In/sub 2/Se/sub 3//CuInSe/sub 2/ solar cells","authors":"S. Kwon, Sung Chan Park, B. Ahn, K. Yoon, Jinsoo Song","doi":"10.1109/PVSC.1997.654111","DOIUrl":null,"url":null,"abstract":"The growth of CuIn/sub 3/Se/sub 5/ layer on CuInSe/sub 2/ films has been studied for the fabrication of CuInSe/sub 2/ solar cell, using the three-stage process. After growing the CuInSe/sub 2/ film, the film surface was quickly converted to a possible ordered vacancy compound (CuIn/sub 3/Se/sub 5/). AES depth analysis indicated the presence of a CuIn/sub 3/Se/sub 5/ layer on the CuInSe/sub 2/ surface. The energy bandgap shifted from 1.04 to 1.24 eV by the formation of CuIn/sub 3/Se/sub 5/ phase on CuInSe/sub 2/ surface. Because the lattice parameters of CuIn/sub 3/Se/sub 5/ are smaller, the XRD peaks were shifted to higher 2/spl theta/ values. In/sub 2/Se/sub 3//CuInSe/sub 2/ cells with a thin CuIn/sub 3/Se/sub 5/ layer at the interface yielded solar efficiency of 8.46% with an active area of 0.2 cm/sup 2/. The device fabricated from the films with a thick CuIn/sub 3/Se/sub 5/ layer on CuInSe/sub 2/ film displayed a double diode effect which was possibly caused the increase of junction interface.","PeriodicalId":251166,"journal":{"name":"Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997","volume":"73 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1997-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PVSC.1997.654111","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

The growth of CuIn/sub 3/Se/sub 5/ layer on CuInSe/sub 2/ films has been studied for the fabrication of CuInSe/sub 2/ solar cell, using the three-stage process. After growing the CuInSe/sub 2/ film, the film surface was quickly converted to a possible ordered vacancy compound (CuIn/sub 3/Se/sub 5/). AES depth analysis indicated the presence of a CuIn/sub 3/Se/sub 5/ layer on the CuInSe/sub 2/ surface. The energy bandgap shifted from 1.04 to 1.24 eV by the formation of CuIn/sub 3/Se/sub 5/ phase on CuInSe/sub 2/ surface. Because the lattice parameters of CuIn/sub 3/Se/sub 5/ are smaller, the XRD peaks were shifted to higher 2/spl theta/ values. In/sub 2/Se/sub 3//CuInSe/sub 2/ cells with a thin CuIn/sub 3/Se/sub 5/ layer at the interface yielded solar efficiency of 8.46% with an active area of 0.2 cm/sup 2/. The device fabricated from the films with a thick CuIn/sub 3/Se/sub 5/ layer on CuInSe/sub 2/ film displayed a double diode effect which was possibly caused the increase of junction interface.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
CuIn/sub 3/Se/sub 5/层在CuInSe/sub 2/薄膜上的生长及其对In/sub 2/Se/sub 3//CuInSe/sub 2/太阳能电池光伏性能的影响
采用三阶段法制备了CuInSe/ sub2 /太阳能电池,研究了CuInSe/ sub3 /Se/ sub5 /层在CuInSe/ sub2 /薄膜上的生长。在生长CuInSe/sub - 2/薄膜后,薄膜表面迅速转化为可能的有序空位化合物(CuIn/sub - 3/Se/sub - 5/)。AES深度分析表明,在CuInSe/sub 2/表面存在CuIn/sub 3/Se/sub 5/层。CuInSe/sub 2/表面形成CuIn/sub 3/Se/sub 5/相,能带隙由1.04 eV变为1.24 eV。由于CuIn/sub 3/Se/sub 5/的晶格参数较小,XRD峰移至较高的2/spl θ /值。In/sub 2/Se/sub 3//CuInSe/sub 2/电池在界面处具有薄的CuIn/sub 3/Se/sub 5/层,其太阳能效率为8.46%,有效面积为0.2 cm/sup 2/。在CuInSe/sub 2/薄膜上加厚CuIn/sub 3/Se/sub 5/层制备的器件显示出双二极管效应,这可能是导致结界面增加的原因。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Electrodeposited CuInSe/sub 2/ thin film devices High efficiency CIGS and CIS cells with CVD ZnO buffer layers Improved thermal control for a-Si:H photovoltaic cells fabricated on polymeric substrates InGaAs monolithic interconnected modules (MIMs) Dust on Mars: Materials Adherence Experiment results from Mars Pathfinder
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1