Laminar Mixed Convection Heat Transfer Analysis in Horizontal Annuli using Hybrid Nanofluid

Riyadh Fayez Sughayyir AlYasi, Nazrul Islam, Radi Abdulmonem alsulami, Badr Ali Bzya Albeshri
{"title":"Laminar Mixed Convection Heat Transfer Analysis in Horizontal Annuli using Hybrid Nanofluid","authors":"Riyadh Fayez Sughayyir AlYasi, Nazrul Islam, Radi Abdulmonem alsulami, Badr Ali Bzya Albeshri","doi":"10.37934/arnht.13.1.5265","DOIUrl":null,"url":null,"abstract":"Heat transfer can be augmented by employing different methodologies and techniques, such as increasing either the heat transfer surface or the heat transfer coefficient between fluid and surface that allows high heat transfer rates in a small volume. The enhanced thermal behavior of nanofluids could supply a basis for a huge innovation in heat transfer intensification. Recently, a new type of nanofluid, known as hybrid nanofluid, which consists of a mixture of two different nanoparticles suspended in the base fluid like water. The present study deals with the analysis of laminar mixed convection heat transfer in horizontal annuli using hybrid nanofluid with the thermal boundary condition of constant heat flux at the inner wall and isothermal outer wall. The SIMPLER numerical algorithm is adopted in the present study. The hybrid nanofluid consists of water as base fluid and Ag-TiO2 as nanoparticles. The ratio of Ag to TiO2 is maintained as 1:3. Main objective of the present study is to compute numerically three-dimensional axis-symmetric, incompressible, steady, laminar flow through annular ducts to investigate the effect of the hybrid nanofluid Ag-TiO2/water on thermal-hydrodynamic characteristics. The analysis reveals that secondary flow due to the buoyancy forces plays an important role in augmenting heat transfer. The development of axial flow and temperature field are strongly found to be influenced by buoyancy. Nusselt number near the entrance region is found to be maximum, then attains a minimum value at a location slightly away from the entrance, and then starts increasing slowly due to the increased buoyancy effects. Finally, the flow becomes almost stable and a nearly constant value of Nusselt number is observed as the flow approaches fully development situation. At a given axial location Nusselt number was found to increase with increasing volumetric concentration of nanoparticle. The effect of Gr Radius ratio on the Nusselt number was also studied","PeriodicalId":119773,"journal":{"name":"Journal of Advanced Research in Numerical Heat Transfer","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-07-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Advanced Research in Numerical Heat Transfer","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.37934/arnht.13.1.5265","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Heat transfer can be augmented by employing different methodologies and techniques, such as increasing either the heat transfer surface or the heat transfer coefficient between fluid and surface that allows high heat transfer rates in a small volume. The enhanced thermal behavior of nanofluids could supply a basis for a huge innovation in heat transfer intensification. Recently, a new type of nanofluid, known as hybrid nanofluid, which consists of a mixture of two different nanoparticles suspended in the base fluid like water. The present study deals with the analysis of laminar mixed convection heat transfer in horizontal annuli using hybrid nanofluid with the thermal boundary condition of constant heat flux at the inner wall and isothermal outer wall. The SIMPLER numerical algorithm is adopted in the present study. The hybrid nanofluid consists of water as base fluid and Ag-TiO2 as nanoparticles. The ratio of Ag to TiO2 is maintained as 1:3. Main objective of the present study is to compute numerically three-dimensional axis-symmetric, incompressible, steady, laminar flow through annular ducts to investigate the effect of the hybrid nanofluid Ag-TiO2/water on thermal-hydrodynamic characteristics. The analysis reveals that secondary flow due to the buoyancy forces plays an important role in augmenting heat transfer. The development of axial flow and temperature field are strongly found to be influenced by buoyancy. Nusselt number near the entrance region is found to be maximum, then attains a minimum value at a location slightly away from the entrance, and then starts increasing slowly due to the increased buoyancy effects. Finally, the flow becomes almost stable and a nearly constant value of Nusselt number is observed as the flow approaches fully development situation. At a given axial location Nusselt number was found to increase with increasing volumetric concentration of nanoparticle. The effect of Gr Radius ratio on the Nusselt number was also studied
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于混合纳米流体的水平环空层流混合对流换热分析
传热可以通过采用不同的方法和技术来增强,例如增加传热表面或流体与表面之间的传热系数,从而在小体积内实现高传热率。纳米流体的增强热行为可以为传热强化的巨大创新提供基础。最近,一种新型的纳米流体被称为混合纳米流体,它是由悬浮在基础流体(如水)中的两种不同纳米颗粒的混合物组成的。在内壁热流密度恒定、外壁等温的热边界条件下,利用混合纳米流体对水平环空层流混合对流换热进行了研究。本研究采用较简单的数值算法。混合纳米流体由水作为基流体和Ag-TiO2作为纳米颗粒组成。Ag与TiO2的比例保持在1:3。本研究的主要目的是通过数值计算三维轴对称、不可压缩、稳定的层流通过环形管道,研究Ag-TiO2/水混合纳米流体对热流体动力特性的影响。分析表明,浮力引起的二次流对增加换热有重要作用。轴流和温度场的发展受到浮力的强烈影响。努塞尔数在靠近入口区域最大,然后在稍远离入口的位置达到最小值,然后由于浮力效应的增加而开始缓慢增加。最后,当流动接近完全发展状态时,流动趋于稳定,努塞尔数趋于恒定。在给定的轴向位置,努塞尔数随着纳米颗粒体积浓度的增加而增加。研究了Gr半径比对Nusselt数的影响
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
6.20
自引率
0.00%
发文量
0
期刊最新文献
Numerical Solution of Heat Equation using Modified Cubic B-spline Collocation Method Newtonian Heating in Magnetohydrodynamic (MHD) Hybrid Nanofluid Flow Near the Stagnation Point over Nonlinear Stretching and Shrinking Sheet A Transient Heat Transfer Analysis of Thermal Necrosis-Aided Dental Implant Removal Numerical Analysis of Transient Convective Heat Transfer in a Dental Implant Activation energy, Rotational and Hall current Effects of Magnetohydrodynamic 3D flow of Non-Newtonian Hybrid Nanofluid over a Stretched Plate
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1