Study of the process of preparing amorphous Fe–W(La) alloy plating by induced co-deposition

Abstract

To obtain high-performance Fe–W alloy plating instead of environmentally hazardous chromium plating, the effects of the cathode material, electrolyte pH, temperature, current density, plating time and rotational speed on the cathode current efficiency and alloy plating are investigated in this paper. The results show that the pH and current density of the plating solution greatly influence the morphology and current efficiency of the cathode. The current efficiency of the cathode can reach 63.56%, and the tungsten content can reach 55% at pH = 8, 60 °C, 12 A/dm 2 , 100 r/min, 75 min, 0.1 mol/l of Fe 2+ and 0.2 mol/l of W 6+ . After XRD analysis, the plating is found to consist of the Fe7W6 amorphous phase. In addition, La is added to the Fe–W alloy under optimal conditions. By analyzing the polarization curve, the potential of the Fe–W(La) alloy is positively shifted by 0.039 V compared with the Fe–W alloy, which has good corrosion resistance.