Photovoltaic module augmented by commercial reflectors in Southern Algeria: Comparison between different reflective materials

Abstract

Even though the southeast region of Algeria, especially Ouargla city, enjoys a lot of sunshine all over the year, fixed photovoltaic (PV) solar panels are not sufficient due to two main reasons. Firstly, these panels are unable to capture sunlight during the early morning and late afternoon, and secondly, their efficiency is low, requiring the use of economical methods to enhance their performance. To overcome these limitations, this research suggests incorporating commercial reflectors to enhance sunlight capture. Furthermore, this paper compares the effects of three types of reflective materials: mirrors, aluminium, and transparent glass, on the performance of the PV module. To achieve this objective, reflectors are installed at the top and bottom of the PV module at their optimal tilt angles. Moreover, the effect of the adjacent module's mirrors was studied by installing two big mirrors (3X). The obtained results show an average improvement of 14.24 %, 11.41 %, and 4.7 % in the electrical energy generated by the PV panel with mirrors, aluminium, and transparent glass, respectively, compared to the module without reflectors. Subsequently, in the large mirror case, the results were positive, with an average 20.84 % increase in the maximal electrical power produced compared to the conventional one.