Effects of matrix and dendrite boundary composition on stress corrosion cracking performance of Alloy 52M buttering layer in simulated PWR primary water

IF 1.1 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Corrosion Pub Date : 2023-11-16 DOI:10.5006/4392
Jiarong Ma, Qi Xiong, Xinhe Xu, Tongmin Cui, Zhanpeng Lu, Tetsuo Shoji
{"title":"Effects of matrix and dendrite boundary composition on stress corrosion cracking performance of Alloy 52M buttering layer in simulated PWR primary water","authors":"Jiarong Ma, Qi Xiong, Xinhe Xu, Tongmin Cui, Zhanpeng Lu, Tetsuo Shoji","doi":"10.5006/4392","DOIUrl":null,"url":null,"abstract":"The oxidation and stress corrosion cracking (SCC) behaviors of Alloy 52M buttering (52Mb) layer were studied in simulated pressurized water reactor (PWR) primary water after microstructure characterization. The 52Mb layer was first post-weld heat treatment (1st-PWHT) and follow-up PWHT (FU-PWHT). Two dilution zones (DZs) were found in both the 1st-PWHT and FU-PWHT 52Mb samples. FU-PWHT decreased the Cr content in the first dilution zone, enhancing the oxidation rate and accelerating the formation of the local oxidation penetration zone at the oxide/substrate interface. Lower Cr content and high Fe content in the dilution zone were detrimental to the SCC resistance of the 52Mb in PWR primary water.","PeriodicalId":10717,"journal":{"name":"Corrosion","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-11-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Corrosion","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.5006/4392","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The oxidation and stress corrosion cracking (SCC) behaviors of Alloy 52M buttering (52Mb) layer were studied in simulated pressurized water reactor (PWR) primary water after microstructure characterization. The 52Mb layer was first post-weld heat treatment (1st-PWHT) and follow-up PWHT (FU-PWHT). Two dilution zones (DZs) were found in both the 1st-PWHT and FU-PWHT 52Mb samples. FU-PWHT decreased the Cr content in the first dilution zone, enhancing the oxidation rate and accelerating the formation of the local oxidation penetration zone at the oxide/substrate interface. Lower Cr content and high Fe content in the dilution zone were detrimental to the SCC resistance of the 52Mb in PWR primary water.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基体和枝晶边界成分对模拟压水堆一次水中合金 52M 黄油层应力腐蚀开裂性能的影响
在对合金 52M 黄油层(52Mb)进行微观结构表征后,研究了其在模拟压水堆(PWR)一次水中的氧化和应力腐蚀开裂(SCC)行为。52Mb 层经过了第一次焊后热处理(1st-PWHT)和后续热处理(FU-PWHT)。在 52Mb 样品中,1st-PWHT 和 FU-PWHT 都发现了两个稀释区 (DZ)。FU-PWHT 降低了第一稀释区的铬含量,提高了氧化速度,加速了氧化物/基底界面局部氧化渗透区的形成。稀释区中较低的铬含量和较高的铁含量不利于 52Mb 在压水堆原水中的抗 SCC 性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Corrosion
Corrosion MATERIALS SCIENCE, MULTIDISCIPLINARY-METALLURGY & METALLURGICAL ENGINEERING
CiteScore
2.80
自引率
12.50%
发文量
97
审稿时长
3 months
期刊介绍: CORROSION is the premier research journal featuring peer-reviewed technical articles from the world’s top researchers and provides a permanent record of progress in the science and technology of corrosion prevention and control. The scope of the journal includes the latest developments in areas of corrosion metallurgy, mechanisms, predictors, cracking (sulfide stress, stress corrosion, hydrogen-induced), passivation, and CO2 corrosion. 70+ years and over 7,100 peer-reviewed articles with advances in corrosion science and engineering have been published in CORROSION. The journal publishes seven article types – original articles, invited critical reviews, technical notes, corrosion communications fast-tracked for rapid publication, special research topic issues, research letters of yearly annual conference student poster sessions, and scientific investigations of field corrosion processes. CORROSION, the Journal of Science and Engineering, serves as an important communication platform for academics, researchers, technical libraries, and universities. Articles considered for CORROSION should have significant permanent value and should accomplish at least one of the following objectives: • Contribute awareness of corrosion phenomena, • Advance understanding of fundamental process, and/or • Further the knowledge of techniques and practices used to reduce corrosion.
期刊最新文献
Implications of grout condition on galvanic coupling and hydrogen absorption within post-tensioned bridge tendons constructed with galvanized steel ducts Bimodal trending in corrosion loss of magnesium alloys Corrosion behavior of Cu-Ni-Fe-Mn-Cr alloy in 3.5 wt.% NaCl solution An Investigation of Corrosion Behaviors of Thermally Sprayed Aluminum (TSA) at Elevated Temperatures Under Thermal Insulations and Autoclave Immersion Conditions A stochastic modeling method for three-dimensional corrosion pits of bridge cable wires and its application
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1