The use of thermoplastic polyurethane composites to develop a model of the renal pelvicalyceal system by 3D printing

IF 1.1 4区 工程技术 Q4 POLYMER SCIENCE Polimery Pub Date : 2024-04-17 DOI:10.14314/polimery.2024.4.2
Krzysztof Balawender, Ł. Przeszłowski
{"title":"The use of thermoplastic polyurethane composites to develop a model of the renal pelvicalyceal system by 3D printing","authors":"Krzysztof Balawender, Ł. Przeszłowski","doi":"10.14314/polimery.2024.4.2","DOIUrl":null,"url":null,"abstract":"Composites based on thermoplastic polyurethanes (TPUR) were obtained using the twin-screw extrusion method. Influence of the addition of 6, 7 and 8 wt% silica and 1–3 wt%. aluminum oxide and 1–3 wt%. dibutyl phthalate (plasticizer) on Rockwell hardness, Charpy impact strength and tensile mechanical properties was tested. The best properties were obtained for a composite containing 8 wt% silica, 3 wt% aluminum oxide and 3 wt% dibutyl phthalates. For this composite, the renal pelvicalyceal system was obtained using the FFF method.","PeriodicalId":20319,"journal":{"name":"Polimery","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2024-04-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polimery","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.14314/polimery.2024.4.2","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 0

Abstract

Composites based on thermoplastic polyurethanes (TPUR) were obtained using the twin-screw extrusion method. Influence of the addition of 6, 7 and 8 wt% silica and 1–3 wt%. aluminum oxide and 1–3 wt%. dibutyl phthalate (plasticizer) on Rockwell hardness, Charpy impact strength and tensile mechanical properties was tested. The best properties were obtained for a composite containing 8 wt% silica, 3 wt% aluminum oxide and 3 wt% dibutyl phthalates. For this composite, the renal pelvicalyceal system was obtained using the FFF method.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
利用热塑性聚氨酯复合材料通过 3D 打印技术开发肾盂膀胱系统模型
采用双螺杆挤压法获得了基于热塑性聚氨酯(TPUR)的复合材料。测试了添加 6、7 和 8 wt% 的二氧化硅、1-3 wt% 的氧化铝和 1-3 wt% 的邻苯二甲酸二丁酯(增塑剂)对洛氏硬度、夏比冲击强度和拉伸机械性能的影响。含有 8 wt% 二氧化硅、3 wt% 氧化铝和 3 wt% 邻苯二甲酸二丁酯的复合材料获得了最佳性能。对于这种复合材料,使用 FFF 方法获得了肾盂肾萼系统。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Polimery
Polimery Materials Science-Polymers and Plastics
CiteScore
2.90
自引率
6.20%
发文量
35
审稿时长
1 months
期刊介绍: The "Polimery" journal, of international circulation, is publishing peerreviewed scientific and technical research papers covering polymer science and technology in the field of polymers, rubbers, chemical fibres and paints. The range of topics covered are raw materials, polymer synthesis, processing and applications of polymers. Apart from scientific and technical research papers the monthly includes technical and commercial information such as reports from fairs and exhibitions as well as home, world and technical news. “Polimery "- an international journal covering the following topics: polymers, rubber, chemical fibres and paints. The Journal is addressed to scientists, managers and engineering staff of universities, Polish Academy of Sciences, R&D institutions, industry, specializing in polymer chemistry, physical chemistry, technology and processing. “Polimery” publishes original, reviewed research, scientific and technology papers in the field of polymer synthesis, analysis, technology and modification, processing, properties, applications and recycling.
期刊最新文献
The use of thermoplastic polyurethane composites to develop a model of the renal pelvicalyceal system by 3D printing Study of cellular structures built from self-similar models and repeatable structures manufactured by FDM/FFF technology Effect of shells number and machining on selected properties of 3D-printed PLA samples Pyrazole-based photoinitiator with antibacterial activity PA 10.10 and PA 6 composites with glass or basalt fibre: mechanical properties in dry and wet state
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1