Flow field measurements around a marine propeller tip and vortex identification procedures

Abstract

Propeller cavitation is one of the main causes of pressure fluctuation and noise around marine propellers, and tip vortex cavitation is one of the main causes of high-frequency underwater radiated noise. To predict tip vortex cavitation, it is necessary to correctly describe the radius of the vortex core and the vortex circulation of the tip vortex. Therefore, in this study, non-cavitating flow field measurements around the tip of model propellers were made for the 0.75 m diameter working section of the large cavitation tunnel at the National Maritime Research Institute, Japan (NMRI) using 2D-PIV. Identification procedures were investigated to develop a tip vortex model. The vortex properties (radius of vortex core and vortex circulation) of the tip vortex were obtained by applying by a Rankine vortex model and a Burgers vortex model. The measured velocity and vorticity values around the tip vortex as identified by the Burgers vortex model were in better agreement than those given by the Rankine vortex model. The Burgers vortex model was suitable for obtaining vortex properties from the measured flow field around the tip vortex. The vortex properties obtained from the identification using the Burgers vortex model showed the Reynolds number demonstrated a greater effect on the radius of the vortex core and vortex circulation. The higher the Reynolds numbers, the smaller the radius of the vortex core and the smaller vortex circulation tends to be. It is also shown that this Reynolds number effect differs depending on the blade shape of the propellers.