Discussion on the application of sequential turbocharging technology on trawlers

Yafei Li, Fan Shi
{"title":"Discussion on the application of sequential turbocharging technology on trawlers","authors":"Yafei Li, Fan Shi","doi":"10.1177/09544089241251633","DOIUrl":null,"url":null,"abstract":"To improve the performance needs of trawlers under the varying load and speed conditions of free-running and trawling operations, this article employs sequential turbocharging technology. By fitting the experimental curves of basic turbocharging and conventional turbocharging (two turbochargers), we obtained the universal characteristic curve of sequential turbocharging. Further, the propeller characteristic curves and load characteristic curves of trawlers under free-running and trawling operations were integrated. The analysis results show that the sequential turbocharging system increases the torque of trawlers by about 20% in the low-speed range; switching to two turbochargers in free-running mode reduces fuel consumption by ∼17.5 g/Wh; switching to basic turbocharging during trawling operations decreases fuel consumption by about 13.9 g/Wh. This study is not only beneficial for the economy of ships but also provides guidance for further improvements in engine mechanics, potentially attracting the interest of readers in the main engine manufacturing field.","PeriodicalId":20552,"journal":{"name":"Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering","volume":"11 1","pages":""},"PeriodicalIF":2.3000,"publicationDate":"2024-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1177/09544089241251633","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

To improve the performance needs of trawlers under the varying load and speed conditions of free-running and trawling operations, this article employs sequential turbocharging technology. By fitting the experimental curves of basic turbocharging and conventional turbocharging (two turbochargers), we obtained the universal characteristic curve of sequential turbocharging. Further, the propeller characteristic curves and load characteristic curves of trawlers under free-running and trawling operations were integrated. The analysis results show that the sequential turbocharging system increases the torque of trawlers by about 20% in the low-speed range; switching to two turbochargers in free-running mode reduces fuel consumption by ∼17.5 g/Wh; switching to basic turbocharging during trawling operations decreases fuel consumption by about 13.9 g/Wh. This study is not only beneficial for the economy of ships but also provides guidance for further improvements in engine mechanics, potentially attracting the interest of readers in the main engine manufacturing field.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
关于拖网渔船应用顺序涡轮增压技术的讨论
为了改善拖网渔船在自由航行和拖网作业的不同负荷和速度条件下的性能需求,本文采用了顺序涡轮增压技术。通过拟合基本涡轮增压和常规涡轮增压(两个涡轮增压器)的实验曲线,我们得到了顺序涡轮增压的通用特性曲线。此外,还整合了拖网渔船在自由运行和拖网作业下的螺旋桨特性曲线和负荷特性曲线。分析结果表明,顺序涡轮增压系统可使拖网渔船在低速范围内增加约 20% 的扭矩;在自由运行模式下切换到两个涡轮增压器可减少约 17.5 克/瓦时的燃油消耗;在拖网作业期间切换到基本涡轮增压器可减少约 13.9 克/瓦时的燃油消耗。这项研究不仅有利于船舶的经济性,还为进一步改进发动机机械提供了指导,可能会引起主机制造领域读者的兴趣。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
3.80
自引率
16.70%
发文量
370
审稿时长
6 months
期刊介绍: The Journal of Process Mechanical Engineering publishes high-quality, peer-reviewed papers covering a broad area of mechanical engineering activities associated with the design and operation of process equipment.
期刊最新文献
Tailoring mechanical, microstructural and toughening characteristics of plasma-sprayed graphene-reinforced samarium niobate coatings for extreme environments Influence of carbon percentage on the wear and friction characteristics of ATOMET 4601 alloys in heavy-duty machinery Tribological behavior of Ni-based composite coatings produced by cold spray Multi-objective optimization of 3D printing parameters to fabricate TPU for tribological applications Multi-fidelity multidisciplinary meta-model based optimization of a slender body with fins
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1