Controlling the Electrode Morphology and Surface Energy to Make Ethanol Fuel Cells Based on Pd-Assisted Etched Porous Silicon

IF 0.5 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Inorganic Materials: Applied Research Pub Date : 2024-05-27 DOI:10.1134/s207511332402045x
O. V. Volovlikova, S. A. Gavrilov
{"title":"Controlling the Electrode Morphology and Surface Energy to Make Ethanol Fuel Cells Based on Pd-Assisted Etched Porous Silicon","authors":"O. V. Volovlikova, S. A. Gavrilov","doi":"10.1134/s207511332402045x","DOIUrl":null,"url":null,"abstract":"<h3 data-test=\"abstract-sub-heading\">Abstract</h3><p>The progress in making macro- and mesoporous layers of porous silicon formed through Pd-assisted etching is analyzed. Different formation times and etching solution temperatures (varying from 25 to 75°C) are taken as the parameters. The layers of porous silicon obtained exhibit ethanol electro-oxidation properties. High values of the dissolution rate of the porous silicon are confirmed at a temperature of 75°C resulting in dramatic thinning and decreasing the specific surface area of the macro- and mesoporous layers, respectively. The resulting porous layers have different surface energies and surface areas. The samples exhibit different rates of ethanol dehydrogenation and differ in the number of dehydrogenated ethanol molecules. This is promising to control the activity of the electrode material in ethanol fuel cells.</p>","PeriodicalId":586,"journal":{"name":"Inorganic Materials: Applied Research","volume":null,"pages":null},"PeriodicalIF":0.5000,"publicationDate":"2024-05-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Inorganic Materials: Applied Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1134/s207511332402045x","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The progress in making macro- and mesoporous layers of porous silicon formed through Pd-assisted etching is analyzed. Different formation times and etching solution temperatures (varying from 25 to 75°C) are taken as the parameters. The layers of porous silicon obtained exhibit ethanol electro-oxidation properties. High values of the dissolution rate of the porous silicon are confirmed at a temperature of 75°C resulting in dramatic thinning and decreasing the specific surface area of the macro- and mesoporous layers, respectively. The resulting porous layers have different surface energies and surface areas. The samples exhibit different rates of ethanol dehydrogenation and differ in the number of dehydrogenated ethanol molecules. This is promising to control the activity of the electrode material in ethanol fuel cells.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
控制电极形态和表面能以制造基于钯辅助蚀刻多孔硅的乙醇燃料电池
摘要 分析了通过钯辅助蚀刻形成多孔硅的大孔和介孔层的进展情况。以不同的形成时间和蚀刻溶液温度(从 25°C 到 75°C 不等)为参数。所获得的多孔硅层具有乙醇电氧化特性。在 75°C 的温度下,多孔硅的高溶解率被证实会导致大孔层和中孔层分别急剧变薄和比表面积减小。由此产生的多孔层具有不同的表面能和表面积。样品的乙醇脱氢速率不同,脱氢乙醇分子的数量也不同。这对控制乙醇燃料电池中电极材料的活性很有帮助。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Inorganic Materials: Applied Research
Inorganic Materials: Applied Research Engineering-Engineering (all)
CiteScore
0.90
自引率
0.00%
发文量
199
期刊介绍: Inorganic Materials: Applied Research  contains translations of research articles devoted to applied aspects of inorganic materials. Best articles are selected from four Russian periodicals: Materialovedenie, Perspektivnye Materialy, Fizika i Khimiya Obrabotki Materialov, and Voprosy Materialovedeniya  and translated into English. The journal reports recent achievements in materials science: physical and chemical bases of materials science; effects of synergism in composite materials; computer simulations; creation of new materials (including carbon-based materials and ceramics, semiconductors, superconductors, composite materials, polymers, materials for nuclear engineering, materials for aircraft and space engineering, materials for quantum electronics, materials for electronics and optoelectronics, materials for nuclear and thermonuclear power engineering, radiation-hardened materials, materials for use in medicine, etc.); analytical techniques; structure–property relationships; nanostructures and nanotechnologies; advanced technologies; use of hydrogen in structural materials; and economic and environmental issues. The journal also considers engineering issues of materials processing with plasma, high-gradient crystallization, laser technology, and ultrasonic technology. Currently the journal does not accept direct submissions, but submissions to one of the source journals is possible.
期刊最新文献
Impact Strength Study of 3D Printed ABS-Plastic Samples Impregnated with Epoxy Resin Electrical Conductivity and Electroluminescence of Crystalline Corundum with Cerium Impurity Microwave Heating of Oxidized Iron Powders in Ferromagnetic Resonance Mode Practical Application of Combined Strengthening Treatment Technology for Steel Tools Plasmochemical Synthesis of Strontium-Aluminosilicate Glass
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1