Research on the influencing factors of anti-skid performance evaluation of asphalt pavement based on lateral force testing system

IF 2.6 4区 材料科学 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY Frontiers in Materials Pub Date : 2024-09-05 DOI:10.3389/fmats.2024.1410542
Xiaoying Zhang, Rong Chang, Zhixiang Xu, Jie Wang, Zhibing Tan
{"title":"Research on the influencing factors of anti-skid performance evaluation of asphalt pavement based on lateral force testing system","authors":"Xiaoying Zhang, Rong Chang, Zhixiang Xu, Jie Wang, Zhibing Tan","doi":"10.3389/fmats.2024.1410542","DOIUrl":null,"url":null,"abstract":"This article conducts experimental research on the influencing factors of the anti-skid performance testing system SCRIM for asphalt pavement. Studied the distribution pattern of anti-skid performance test results of the testing system under different testing speeds, test tires, temperature, water film thickness, test wheel position, tire wear degree, and other factors. Revealed the influence law of various influencing factors on the anti-skid performance of asphalt pavement. The test results indicate that the SFC test value decreases with the increase of vehicle speed. The test results of tires made of different materials vary greatly, and tires with wear exceeding 3 mm cannot be used for testing. The influence of water film thickness on the measured values varies depending on the SFC level. The SFC measurement value of the normal trajectory of the vehicle’s driving wheel track is the smallest, and the measurement value of the left trajectory is greater than that of the right trajectory. The SFC measurement decreases as the tire wear increases.","PeriodicalId":12524,"journal":{"name":"Frontiers in Materials","volume":null,"pages":null},"PeriodicalIF":2.6000,"publicationDate":"2024-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Frontiers in Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.3389/fmats.2024.1410542","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

This article conducts experimental research on the influencing factors of the anti-skid performance testing system SCRIM for asphalt pavement. Studied the distribution pattern of anti-skid performance test results of the testing system under different testing speeds, test tires, temperature, water film thickness, test wheel position, tire wear degree, and other factors. Revealed the influence law of various influencing factors on the anti-skid performance of asphalt pavement. The test results indicate that the SFC test value decreases with the increase of vehicle speed. The test results of tires made of different materials vary greatly, and tires with wear exceeding 3 mm cannot be used for testing. The influence of water film thickness on the measured values varies depending on the SFC level. The SFC measurement value of the normal trajectory of the vehicle’s driving wheel track is the smallest, and the measurement value of the left trajectory is greater than that of the right trajectory. The SFC measurement decreases as the tire wear increases.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于侧向力测试系统的沥青路面抗滑性能评价影响因素研究
本文对沥青路面抗滑性能测试系统 SCRIM 的影响因素进行了试验研究。研究了在不同试验速度、试验轮胎、温度、水膜厚度、试验轮位置、轮胎磨损程度等因素作用下,试验系统抗滑性能试验结果的分布规律。揭示了各种影响因素对沥青路面抗滑性能的影响规律。试验结果表明,SFC 试验值随着车速的增加而降低。不同材质的轮胎测试结果差异较大,磨损超过 3 毫米的轮胎不能用于测试。水膜厚度对测量值的影响因 SFC 水平而异。车辆驱动轮轨道正常轨迹的 SFC 测量值最小,左侧轨迹的测量值大于右侧轨迹。随着轮胎磨损程度的增加,SFC 测量值也会降低。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Frontiers in Materials
Frontiers in Materials Materials Science-Materials Science (miscellaneous)
CiteScore
4.80
自引率
6.20%
发文量
749
审稿时长
12 weeks
期刊介绍: Frontiers in Materials is a high visibility journal publishing rigorously peer-reviewed research across the entire breadth of materials science and engineering. This interdisciplinary open-access journal is at the forefront of disseminating and communicating scientific knowledge and impactful discoveries to researchers across academia and industry, and the public worldwide. Founded upon a research community driven approach, this Journal provides a balanced and comprehensive offering of Specialty Sections, each of which has a dedicated Editorial Board of leading experts in the respective field.
期刊最新文献
Mid-infrared optical coherence tomography and machine learning for inspection of 3D-printed ceramics at the micron scale Prediction of thermal protection performance and empirical study of flame-retardant cotton based on a combined model Performance-based engineering: formulating sustainable concrete with sawdust and steel fiber for superior mechanical properties Flexural behavior of a UHPC slab - FRP truss hybrid beam implementing a novel FRP joint and tailored shear connector Broadband acoustic pseudospin topological states based on the reverse spin-orbit coupling in generalized insulators
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1