Economic and economic statistical designs of -X control charts under Burr XII shock model

A. Heydari, M. B. Moghadam, F. Eskandari
{"title":"Economic and economic statistical designs of -X control charts under Burr XII shock model","authors":"A. Heydari, M. B. Moghadam, F. Eskandari","doi":"10.1504/IJQET.2016.081626","DOIUrl":null,"url":null,"abstract":"The optimal values of economic and economic statistical designs of -X control charts are influenced by a model used for distribution of occurring time of assignable causes or shock model. So far, only a small number of failure time distributions such as exponential, gamma and Weibull with fixed or increasing hazard rates have been used as shock models. However, from both theoretical and practical aspects, processes under study may not have fixed or increasing hazard rates. A proper alternative is the Burr XII distribution which its hazard rate can be fixed, increasing, decreasing, single mode or even U-shaped. In this research paper, economic and economic statistical designs of -X control charts under the Burr XII shock models were proposed and constructed. The obtained design models have been implemented by a numerical example and a sensitivity analysis were conducted.","PeriodicalId":38209,"journal":{"name":"International Journal of Quality Engineering and Technology","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2016-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1504/IJQET.2016.081626","citationCount":"9","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Quality Engineering and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1504/IJQET.2016.081626","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 9

Abstract

The optimal values of economic and economic statistical designs of -X control charts are influenced by a model used for distribution of occurring time of assignable causes or shock model. So far, only a small number of failure time distributions such as exponential, gamma and Weibull with fixed or increasing hazard rates have been used as shock models. However, from both theoretical and practical aspects, processes under study may not have fixed or increasing hazard rates. A proper alternative is the Burr XII distribution which its hazard rate can be fixed, increasing, decreasing, single mode or even U-shaped. In this research paper, economic and economic statistical designs of -X control charts under the Burr XII shock models were proposed and constructed. The obtained design models have been implemented by a numerical example and a sensitivity analysis were conducted.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Burr 12冲击模型下-X控制图的经济和经济统计设计
控制图的经济和经济统计设计的最优值受到可分配原因发生时间分布模型或冲击模型的影响。到目前为止,只有少数的失效时间分布,如具有固定或增加的危险率的指数分布、伽玛分布和威布尔分布被用作冲击模型。然而,从理论和实践两方面来看,所研究的过程可能没有固定或增加的危害率。一种合适的选择是Burr XII分布,它的危险率可以是固定的、增加的、减少的、单模态的甚至是u型的。本文提出并构建了Burr XII冲击模型下-X控制图的经济和经济统计设计。通过数值算例对所得设计模型进行了实现,并进行了灵敏度分析。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
International Journal of Quality Engineering and Technology
International Journal of Quality Engineering and Technology Engineering-Safety, Risk, Reliability and Quality
CiteScore
0.40
自引率
0.00%
发文量
1
期刊介绍: IJQET fosters the exchange and dissemination of research publications aimed at the latest developments in all areas of quality engineering. The thrust of this international journal is to publish original full-length articles on experimental and theoretical basic research with scholarly rigour. IJQET particularly welcomes those emerging methodologies and techniques in concise and quantitative expressions of the theoretical and practical engineering and science disciplines.
期刊最新文献
A LEAN SIX-SIGMA CASE STUDY TO IMPROVE THE MANUFACTURING PROCESS AFFECTED DURING COVID-19 Quality Insight: Application of DEJI Systems Model for Quality Assurance in Industry 4.0 Optimising the Manufacturing Process and Product Design Using the Design of Experiment Method: The Case of Fancy Boucl Stochastic analysis of delayed reporting of faults in a computer network using copula distribution Implementation of Six Sigma in Small-scale ceramic industry and its holistic assessment
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1