Design of Facultative Pond for the Treatment of Industrial Waste Water in Urban Settlement

Abstract

This study evaluated the degree of pollution of Ikpoba River due to the incessant discharge of industrial wastewater into the river. The entire study area was digitised and geo-referenced in order to generate the map of the study area as well as the sampling points. Eight (8) water samples were obtained from different locations from the direction of flow of industrial discharge into the river and also within the river. The coordinate of the sample collection points were acquired using handheld geographic positioning system (GPS). Water samples for physicochemical analysis were collected in a clean sterilized plastic container and analysis were carried out in the laboratory following standard procedure. The environmental variables measured were dissolved oxygen (DO), total suspended solid (TSS), pH, total dissolved solid (TDS), turbidity, concentration of nitrate and nitrite, chloride, phosphate, zinc, barium, tin, biological oxygen demand (BOD), conductivity, manganese, magnesium, calcium etc. Results obtained showed that most parameters investigated had increasing values. The calculated water quality index (WQI) from the sampling points ranged from 40.02 to 52.62, which indicates that most of the samples are bad as classified using National Sanitation Foundation (NSF) standard. This study therefore recommends that water quality around areas of industrial wastewater discharge in Ikpoba hill should be monitored and adequate treatment recommended where necessary.