用于2.5 ~ 2.7 GHz移动WiMAX的30.3% PAE HBT Doherty功率放大器

D. Kang, Jinsung Choi, Dongsu Kim, Daekyu Yu, K. Min, Bumman Kim
{"title":"用于2.5 ~ 2.7 GHz移动WiMAX的30.3% PAE HBT Doherty功率放大器","authors":"D. Kang, Jinsung Choi, Dongsu Kim, Daekyu Yu, K. Min, Bumman Kim","doi":"10.1109/MWSYM.2010.5517709","DOIUrl":null,"url":null,"abstract":"The Doherty power amplifier for mobile WiMAX application is fully integrated in 1.2×1.2 mm2 using a 2-µm InGaP/GaAs HBT process. The direct input power dividing technique is employed on a chip. Broadband input and output matching techniques are used for broadband Doherty operation. A 1.5 times larger peaking amplifier than carrier amplifier is used to have high efficiency for IEEE 802.16e m-WiMAX signal, which has 9.6 dB crest factor and 8.75 MHz bandwidth. The PA with a supply voltage of 3.4V has an EVM of 2.3% and a PAE of 31.5% at an output power of 24.75 dBm and an operating frequency of 2.6 GHz. The PAE of over 30.3% and the output power of over 24.6 dBm with the EVM of lower than 3.15% and the gain variation of 0.2 dB are achieved across 2.5∼2.7 GHz without any assistant technique for linearization.","PeriodicalId":341557,"journal":{"name":"2010 IEEE MTT-S International Microwave Symposium","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2010-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"20","resultStr":"{\"title\":\"30.3% PAE HBT Doherty power amplifier for 2.5∼2.7 GHz mobile WiMAX\",\"authors\":\"D. Kang, Jinsung Choi, Dongsu Kim, Daekyu Yu, K. Min, Bumman Kim\",\"doi\":\"10.1109/MWSYM.2010.5517709\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The Doherty power amplifier for mobile WiMAX application is fully integrated in 1.2×1.2 mm2 using a 2-µm InGaP/GaAs HBT process. The direct input power dividing technique is employed on a chip. Broadband input and output matching techniques are used for broadband Doherty operation. A 1.5 times larger peaking amplifier than carrier amplifier is used to have high efficiency for IEEE 802.16e m-WiMAX signal, which has 9.6 dB crest factor and 8.75 MHz bandwidth. The PA with a supply voltage of 3.4V has an EVM of 2.3% and a PAE of 31.5% at an output power of 24.75 dBm and an operating frequency of 2.6 GHz. The PAE of over 30.3% and the output power of over 24.6 dBm with the EVM of lower than 3.15% and the gain variation of 0.2 dB are achieved across 2.5∼2.7 GHz without any assistant technique for linearization.\",\"PeriodicalId\":341557,\"journal\":{\"name\":\"2010 IEEE MTT-S International Microwave Symposium\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2010-05-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"20\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2010 IEEE MTT-S International Microwave Symposium\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/MWSYM.2010.5517709\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2010 IEEE MTT-S International Microwave Symposium","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/MWSYM.2010.5517709","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 20

摘要

用于移动WiMAX应用的Doherty功率放大器采用2 μ m InGaP/GaAs HBT工艺,完全集成在1.2×1.2 mm2中。在芯片上采用了直接输入功率分割技术。宽带多尔蒂运算采用宽带输入输出匹配技术。采用比载波放大器大1.5倍的峰值放大器对峰值系数为9.6 dB、带宽为8.75 MHz的IEEE 802.16e m-WiMAX信号进行高效处理。电源电压为3.4V时,输出功率为24.75 dBm,工作频率为2.6 GHz, EVM为2.3%,PAE为31.5%。在没有任何辅助线性化技术的情况下,在2.5 ~ 2.7 GHz范围内实现了超过30.3%的PAE和超过24.6 dBm的输出功率,EVM低于3.15%,增益变化0.2 dB。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
30.3% PAE HBT Doherty power amplifier for 2.5∼2.7 GHz mobile WiMAX
The Doherty power amplifier for mobile WiMAX application is fully integrated in 1.2×1.2 mm2 using a 2-µm InGaP/GaAs HBT process. The direct input power dividing technique is employed on a chip. Broadband input and output matching techniques are used for broadband Doherty operation. A 1.5 times larger peaking amplifier than carrier amplifier is used to have high efficiency for IEEE 802.16e m-WiMAX signal, which has 9.6 dB crest factor and 8.75 MHz bandwidth. The PA with a supply voltage of 3.4V has an EVM of 2.3% and a PAE of 31.5% at an output power of 24.75 dBm and an operating frequency of 2.6 GHz. The PAE of over 30.3% and the output power of over 24.6 dBm with the EVM of lower than 3.15% and the gain variation of 0.2 dB are achieved across 2.5∼2.7 GHz without any assistant technique for linearization.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
A new approach to design low cost, low complexity phased arrays Use of ground planes within the spatial images technique: Application to the analysis of rectangular multilayered shielded enclosures Negative and zero group velocity in microstrip/negative-refractive-index transmission-line couplers A dual-mode mm-wave injection-locked frequency divider with greater than 18% locking range in 65nm CMOS Asymmetric multilevel outphasing transmitter using class-E PAs with discrete pulse width modulation
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1