一种帝国主义竞争对手的算法,以优化PID控制器和ANFIS的永久磁同步机为优化

Machrus Ali, A. Raikhani, Budiman Budiman, Hendi Sopian
{"title":"一种帝国主义竞争对手的算法,以优化PID控制器和ANFIS的永久磁同步机为优化","authors":"Machrus Ali, A. Raikhani, Budiman Budiman, Hendi Sopian","doi":"10.21070/JEEE-U.V3I1.2023","DOIUrl":null,"url":null,"abstract":"Permanent Magnet Syschronous Machine (PMSM) has low torque, so good control is needed to be stable quickly. PMSM uses the principle of faraday experiments which is rotating a magnet in a coil or vice versa. When a magnet moves in a coil, there is a change in magnetic flux in the coil and penetrates perpendicular to the coil so that there is a potential difference between the ends of the coil, regarding this due to changes in magnetic flux. Magnetic flux can be changed by moving a magnet in a coil or vice versa by utilizing other energy sources. To get a good optimization result, the right control constants are needed. So that the best output is obtained. To get the right constants, a suitable and good method is needed, including using artificial intelligence. In this study using the Imperialist Competitive Algorithm (ICA) method. From the simulation results it was found that the best controller design in this study was ANFIS-ICA with the best profile, torque profile, voltage profile, and rotation profile. The largest current is 2.45 A, the smallest overshot torque is 0.48 pu, the largest voltage frequency is 9.84 khz, and the best rotation (close to the reference) is 700.02 rpm. The results of this study will be continued with the use of other artificial intelligence.","PeriodicalId":320287,"journal":{"name":"JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA)","volume":"282 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-04-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"9","resultStr":"{\"title\":\"Algoritma Persaingan Imperialis Sebagai Optimasi Kontroler PID dan ANFIS Pada Mesin Sinkron Magnet Permanen\",\"authors\":\"Machrus Ali, A. Raikhani, Budiman Budiman, Hendi Sopian\",\"doi\":\"10.21070/JEEE-U.V3I1.2023\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Permanent Magnet Syschronous Machine (PMSM) has low torque, so good control is needed to be stable quickly. PMSM uses the principle of faraday experiments which is rotating a magnet in a coil or vice versa. When a magnet moves in a coil, there is a change in magnetic flux in the coil and penetrates perpendicular to the coil so that there is a potential difference between the ends of the coil, regarding this due to changes in magnetic flux. Magnetic flux can be changed by moving a magnet in a coil or vice versa by utilizing other energy sources. To get a good optimization result, the right control constants are needed. So that the best output is obtained. To get the right constants, a suitable and good method is needed, including using artificial intelligence. In this study using the Imperialist Competitive Algorithm (ICA) method. From the simulation results it was found that the best controller design in this study was ANFIS-ICA with the best profile, torque profile, voltage profile, and rotation profile. The largest current is 2.45 A, the smallest overshot torque is 0.48 pu, the largest voltage frequency is 9.84 khz, and the best rotation (close to the reference) is 700.02 rpm. The results of this study will be continued with the use of other artificial intelligence.\",\"PeriodicalId\":320287,\"journal\":{\"name\":\"JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA)\",\"volume\":\"282 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-04-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"9\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.21070/JEEE-U.V3I1.2023\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21070/JEEE-U.V3I1.2023","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 9

摘要

永磁同步电机(PMSM)的转矩较小,需要良好的控制才能快速稳定运行。永磁同步电机使用法拉第实验的原理,即在线圈中旋转磁铁,反之亦然。当磁铁在线圈中移动时,线圈中的磁通量发生变化,并且垂直于线圈穿透,因此线圈两端之间存在电位差,关于这是由于磁通量的变化。磁通量可以通过移动线圈中的磁体来改变,反之亦然,通过利用其他能源。为了获得良好的优化结果,需要适当的控制常数。从而获得最佳输出。为了得到正确的常数,需要一种合适的好方法,包括使用人工智能。本研究采用帝国主义竞争算法(ICA)方法。仿真结果表明,本研究的最佳控制器设计为具有最佳轮廓、扭矩轮廓、电压轮廓和旋转轮廓的anfisi - ica。最大电流为2.45 A,最小过冲转矩为0.48 pu,最大电压频率为9.84 khz,最佳旋转(接近参考)为700.02 rpm。这项研究的结果将继续与其他人工智能的使用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Algoritma Persaingan Imperialis Sebagai Optimasi Kontroler PID dan ANFIS Pada Mesin Sinkron Magnet Permanen
Permanent Magnet Syschronous Machine (PMSM) has low torque, so good control is needed to be stable quickly. PMSM uses the principle of faraday experiments which is rotating a magnet in a coil or vice versa. When a magnet moves in a coil, there is a change in magnetic flux in the coil and penetrates perpendicular to the coil so that there is a potential difference between the ends of the coil, regarding this due to changes in magnetic flux. Magnetic flux can be changed by moving a magnet in a coil or vice versa by utilizing other energy sources. To get a good optimization result, the right control constants are needed. So that the best output is obtained. To get the right constants, a suitable and good method is needed, including using artificial intelligence. In this study using the Imperialist Competitive Algorithm (ICA) method. From the simulation results it was found that the best controller design in this study was ANFIS-ICA with the best profile, torque profile, voltage profile, and rotation profile. The largest current is 2.45 A, the smallest overshot torque is 0.48 pu, the largest voltage frequency is 9.84 khz, and the best rotation (close to the reference) is 700.02 rpm. The results of this study will be continued with the use of other artificial intelligence.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Leak Monitoring in Split Duct Air Conditioner Based on Internet of Things Design of a Height and Weight Measurement Tool for Toddlers at Spreadsheet-Based Posyandu The Protection Relay Coordination Studies (Over Current Relays and Ground Fault Relays) On The Power Plant Electrical System, PT. Rekind Daya Mamuju By Using The ETAP 12.6 Program Design of Atmega2560 Charge Controller Battery Using Static Bicycle Sistem Monitoring Dan Kontrol Motor Listrik Industri Menggunakan Internet Of Things (IoT)
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1