A Feasibility Analysis of a Low Noise and Dust Suction Type Pavement Cutter

A large amount of fine dust is generated during the process of pavement cutting. Consequently, reducing the amount of fine dust generated during pavement cutting is crucial for the overall management of fine dust. Based on this premise, in this study, a conceptual model is proposed for a device that can be employed for recovering scattered dust generated at the site of pavement cutting. The economic feasibility associated with the incorporation of the proposed model was analyzed. Results obtained from the economic feasibility analysis of the proposed conceptual model indicate that the benefit ratio is 2.96, which is significantly higher than 1. The rate of return is found to be 62.78%, which significantly exceeds the minimum expected rate of return (i.e., 10%), as established on the basis of interviews conducted with companies that implement pavement cutting. Furthermore, the break-even point is found to be at approximately 21.6 months. Hence, the proposed pavement cutter, which features dust suction and a low noise level, is economically feasible.