Design and analysis of 1-to-4 wilkinson power divider for antenna array feeding network

In this paper, A Novel 1 to 4 modified Wilkinson power divider operating over the frequency range of (3 GHz to 8 GHz) is proposed. The design perception of the proposed divider based on two different stages and printed on FR4 (Epoxy laminate material) with the thickness of 1.57mm and єr =4.3 respectively. The modified design of this power divider including curved corners instead of the sharp edges and some modification in the length of matching stubs. In addition, this paper contain the power divider with equal power split at all ports, reasonable insertion loss, acceptable return loss below −10 dB, good impedance matching at all ports and satisfactory isolation performance has been obtained over the mentioned frequency range. The design concept and optimization development is practicable through CST simulation software.