[The method of esthetic crown restoration with composite resin jacket crown in primary molars].

The term "esthetics" has recently been also used in the dental field, and a field called esthetic dentistry is increasingly being noted. The number of not only adult but also pediatric patients who visit for treatment aiming at esthetic recovery is being increased. Inpedodontics, composite resin of the coronal color is generally used in the restoration of deciduous incisors. However, the method using metal crowns for the deciduous teeth is used for the deciduous molars at present. We applied a composite resin jacket crown to the deciduous molar in a way similar to that of esthetic crown restoration for the anterior teeth. The surgical procedure before crown preparation varied slightly according to the presence or absence of pulpal treatment of vital teeth and with non-vital teeth, but the application was performed as follows: 1) Desensitization of pulp, pulpal treatment and core construction. 2) Preparation of crown. 3) Selection, trial set and occlusal equilibration of a metal crown for the deciduous tooth. 4) Precision impression with a silicone impression material. 5) Removal of the metal crown for the deciduous tooth from the impression material. 6) Making of an under-cut to the abutment tooth on the buccal lingual side. 7) Filling of the impression with chemical polymerization resin. 8) Application of pressure in the oral cavity. 9) Adjustment of edge and crown forms. Thus, the preparation method for the composite resin jacket crown was relatively simple. Since this surgery, the patient has been followed up for 1 year and 6 months, and no specifically troublesome points have been observed clinically. The patient and her parents are satisfied with the results.(ABSTRACT TRUNCATED AT 250 WORDS)