{"title":"在住宅建筑中使用压制木制品的卫生方面。第一部分:刨花板老化对甲醛释放的影响。","authors":"R Wiglusz, I Jarnuszkiewicz, E Sitko, L Wolska","doi":"","DOIUrl":null,"url":null,"abstract":"<p><p>Urea-formaldehyde-resins bounded particleboards (100 x 40 mm plates) each from a different manufactory plant, were stored at room temperature, with free access of air. In selected time intervals plates were placed in the climatic chamber for five days, and formaldehyde (CH2O) emission were determined. The conditions were as follows: loading factor 1 m2/m3, one air exchange per hour, air temperature of 25 degrees C and relative humidity (RH) 45%. During the 3 months following the production, CH2O emission decreased by more than 50%. During the next months of storing the emission decrease was slight. In the period of 1-3 years since the production, CH2O emission was 0.13-0.06 mg/m2/h, regardless of the amount of formaldehyde released in the first period after the production.</p>","PeriodicalId":72482,"journal":{"name":"Bulletin of the Institute of Maritime and Tropical Medicine in Gdynia","volume":"41 1-4","pages":"73-8"},"PeriodicalIF":0.0000,"publicationDate":"1990-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Hygienic aspects of the use of pressed-wood products in residential buildings. Part I. The effect of particleboards ageing on release of formaldehyde.\",\"authors\":\"R Wiglusz, I Jarnuszkiewicz, E Sitko, L Wolska\",\"doi\":\"\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Urea-formaldehyde-resins bounded particleboards (100 x 40 mm plates) each from a different manufactory plant, were stored at room temperature, with free access of air. In selected time intervals plates were placed in the climatic chamber for five days, and formaldehyde (CH2O) emission were determined. The conditions were as follows: loading factor 1 m2/m3, one air exchange per hour, air temperature of 25 degrees C and relative humidity (RH) 45%. During the 3 months following the production, CH2O emission decreased by more than 50%. During the next months of storing the emission decrease was slight. In the period of 1-3 years since the production, CH2O emission was 0.13-0.06 mg/m2/h, regardless of the amount of formaldehyde released in the first period after the production.</p>\",\"PeriodicalId\":72482,\"journal\":{\"name\":\"Bulletin of the Institute of Maritime and Tropical Medicine in Gdynia\",\"volume\":\"41 1-4\",\"pages\":\"73-8\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1990-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Bulletin of the Institute of Maritime and Tropical Medicine in Gdynia\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bulletin of the Institute of Maritime and Tropical Medicine in Gdynia","FirstCategoryId":"1085","ListUrlMain":"","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
每个来自不同工厂的刨花板(100 x 40 mm板)由脲醛树脂粘合而成,储存在室温下,可以自由接触空气。在选定的时间间隔内,将板材放置在气候室中5天,并测定甲醛(CH2O)排放量。加载系数为1 m2/m3,换风1次/ h,空气温度25℃,相对湿度45%。在生产后的3个月内,CH2O排放量减少了50%以上。在接下来的几个月的储存中,排放量略有下降。在投产后1-3年内,无论甲醛释放量多少,CH2O排放量为0.13-0.06 mg/m2/h。
Hygienic aspects of the use of pressed-wood products in residential buildings. Part I. The effect of particleboards ageing on release of formaldehyde.
Urea-formaldehyde-resins bounded particleboards (100 x 40 mm plates) each from a different manufactory plant, were stored at room temperature, with free access of air. In selected time intervals plates were placed in the climatic chamber for five days, and formaldehyde (CH2O) emission were determined. The conditions were as follows: loading factor 1 m2/m3, one air exchange per hour, air temperature of 25 degrees C and relative humidity (RH) 45%. During the 3 months following the production, CH2O emission decreased by more than 50%. During the next months of storing the emission decrease was slight. In the period of 1-3 years since the production, CH2O emission was 0.13-0.06 mg/m2/h, regardless of the amount of formaldehyde released in the first period after the production.