RELATIONSHIPS BETWEEN ARM SPAN AND THE MECHANICS OF THE ONE-REPETITION MAXIMUM TRADITIONAL AND CLOSE-GRIP BENCH PRESS

The traditional bench press (TBP), performed with a grip width that maximizes strength, is a popular exercise for developing the upper-body. The close-grip bench press (CGBP) is a variation of the TBP often used to emphasize the triceps brachii over prime movers such as the pectoralis major. An individual’s arm span (AS; distance between the middle fingers of each hand while the arms are outstretched) could affect the mechanics of each exercise, which may be exacerbated by the change in grip. This study investigated relationships between AS and TBP and CGBP mechanics in resistance-trained men. Twenty-one participants completed a one-repetition maximum (1RM) TBP and CGBP. The TBP was performed with the preferred grip (measured relative to biacromial distance [BAD]), and the CGBP with a grip width of 95% BAD. A linear position transducer measured: lift distance; peak and mean power, velocity, and force; the distance and time when peak power occurred; and work. Pearson’s correlations (r; p < 0.05) computed relationships between AS and TBP and CGBP mechanics. There were significant positive relationships between AS and TBP lift distance and work (r = 0.46 and 0.51, respectively). For the CGBP, there was a significant positive relationship between AS and work (r = 0.48). There were no other significant correlations between AS and lift mechanics. Resistance-trained men with a longer AS may move the bar further and perform more work in the 1RM TBP and CGBP. This could influence how coaches measure training volume, and intensity for individuals with different AS.