{"title":"Astaloy 85Mo 烧结动力学的多尺度研究","authors":"O. Schenk, Y. Deng, A. Kaletsch, C. Broeckmann","doi":"10.1177/00325899231218543","DOIUrl":null,"url":null,"abstract":"Shrinkage during the sintering of powder compacts depends on numerous parameters, including green body characteristics such as particle size and green density. These parameters are also decisive for the initial microstructure and its evolution during sintering. In this study, a novel experimental setup is used to quantify the time-dependent microstructural evolution in water-atomised Astaloy 85Mo powder. Green bodies with different particle sizes and density levels were polished on the top surface and then subjected to an interrupted sintering procedure in a quenching dilatometer. Intermediate examinations of the microstructure by scanning electron microscopy revealed the pore morphology and the thermally etched austenite grain size. It was found that pore rounding relies solely on the local curvature only, whereas neck growth is in good agreement with analytical models. An increase in diffusivity was found on the macroscale and on the microscale due to the pre-deformation of the particles.","PeriodicalId":20392,"journal":{"name":"Powder Metallurgy","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2024-01-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Multiscale investigation of sintering kinetics of Astaloy 85Mo\",\"authors\":\"O. Schenk, Y. Deng, A. Kaletsch, C. Broeckmann\",\"doi\":\"10.1177/00325899231218543\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Shrinkage during the sintering of powder compacts depends on numerous parameters, including green body characteristics such as particle size and green density. These parameters are also decisive for the initial microstructure and its evolution during sintering. In this study, a novel experimental setup is used to quantify the time-dependent microstructural evolution in water-atomised Astaloy 85Mo powder. Green bodies with different particle sizes and density levels were polished on the top surface and then subjected to an interrupted sintering procedure in a quenching dilatometer. Intermediate examinations of the microstructure by scanning electron microscopy revealed the pore morphology and the thermally etched austenite grain size. It was found that pore rounding relies solely on the local curvature only, whereas neck growth is in good agreement with analytical models. An increase in diffusivity was found on the macroscale and on the microscale due to the pre-deformation of the particles.\",\"PeriodicalId\":20392,\"journal\":{\"name\":\"Powder Metallurgy\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2024-01-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Powder Metallurgy\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1177/00325899231218543\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Powder Metallurgy","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1177/00325899231218543","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
Multiscale investigation of sintering kinetics of Astaloy 85Mo
Shrinkage during the sintering of powder compacts depends on numerous parameters, including green body characteristics such as particle size and green density. These parameters are also decisive for the initial microstructure and its evolution during sintering. In this study, a novel experimental setup is used to quantify the time-dependent microstructural evolution in water-atomised Astaloy 85Mo powder. Green bodies with different particle sizes and density levels were polished on the top surface and then subjected to an interrupted sintering procedure in a quenching dilatometer. Intermediate examinations of the microstructure by scanning electron microscopy revealed the pore morphology and the thermally etched austenite grain size. It was found that pore rounding relies solely on the local curvature only, whereas neck growth is in good agreement with analytical models. An increase in diffusivity was found on the macroscale and on the microscale due to the pre-deformation of the particles.
期刊介绍:
Powder Metallurgy is an international journal publishing peer-reviewed original research on the science and practice of powder metallurgy and particulate technology. Coverage includes metallic particulate materials, PM tool materials, hard materials, composites, and novel powder based materials.