A Novel Technique for High-Performance Grid Integrated with Restricted Placement of PV-DG considering Load Change

The distributed generation (DG) units’ penetrations in power systems are becoming more prevalent. The majority of recent studies are now focusing on how to best position and size PV-DG units to further improve grid performance. In actuality, and as a result of ideal design requirements, the size and position of the PV are chosen and executed, and no luxury for a change. In this work, the PV-DG unit sizing and location were determined and placed beforehand. Also, load change is a fact and is to be highly considered in the grid. Studying the grid performance and how to enhance it under these conditions is the main objective of this study. This examination was executed using an IEEE 15 bus system in a MATLAB environment. Distribution lines were proposed to connect the PV-DG from its restricted location to the required bus. The purpose of this study is therefore to evaluate the grid’s performance with various actual loads on each bus while connecting a PV-DG unit through a distribution line while taking the available transfer capacity (ATC) of the network into account to find the optimally connected bus. The results said that the optimally connected bus is changed by changing the load which is not doable on land. The results obtained indicate that breaking up PV-DG units into smaller units in the same location and connecting them to every bus was the best option for improving grid performance.