Accumulation of Particles in an Annular Centrifugal Contactor Cascade and the Effect upon the Extraction of Nitric Acid

Centrifugal contactors (CCs) are a technology candidate for the development of advanced reprocessing flowsheets. While they offer many advantages, such as process intensification, there are still uncertainties regarding their industrial deployment. The presence of particles in the process streams in particular may present a challenge to both performance and operability. Preliminary studies have been undertaken to evaluate the accumulation of particles in the contactors and the effect upon the extraction behaviour of nitric acid. Aluminium oxide (Al2O3) particles were suspended in the aqueous feed solution during the operation of a three-stage, 40 mm diameter CC cascade. The presence of insoluble solid particles in the aqueous feed, up to 7 g/L, were not observed to affect phase separation and entrainment under the experimental conditions investigated. The particles were centrifuged out of solution and accumulated as a thin cake/bed in the rotors of each stage. This work also illustrates that particles do entrain through the cascade. The predominant effect on the rate of accumulation was particle concentration in the aqueous feed solution, and increasing solids loading was observed to have an impact upon the extraction of nitric acid across the cascade.