Liutauras Marcinauskas, Karina Ratautaitė, Žydrūnas Kavaliauskas, Audrius Žunda, Romualdas Kėželis, Mindaugas Aikas
{"title":"添加石墨和氧化锆对等离子喷涂氧化铝涂层摩擦学特性的影响","authors":"Liutauras Marcinauskas, Karina Ratautaitė, Žydrūnas Kavaliauskas, Audrius Žunda, Romualdas Kėželis, Mindaugas Aikas","doi":"10.3390/coatings14080978","DOIUrl":null,"url":null,"abstract":"Al2O3, Al2O3-graphite and Al2O3-ZrO2 coatings were formed on the C45 steel rolls using atmospheric plasma spraying. The influence of graphite and zirconia addition on the surface morphology, phase composition and tribological properties under dry sliding conditions using 30 N load were analyzed. It was found that the addition of graphite or ZrO2 slightly affected the fraction of the α-Al2O3 and γ-Al2O3 phases in the alumina coatings. The highest mass loss rate (~8.84 × 10−4 g/s) was obtained for the friction pair of C45 steel roll and steel plate. The friction coefficient of the Al2O3-graphite coating was slightly lower (up to 7%) compared to the coating of Al2O3-ZrO2. However, the friction pair of Al2O3-ZrO2 coating and steel plate demonstrated the highest wear resistance under dry sliding conditions. The increase in the wear resistance of the Al2O3-graphite and Al2O3-ZrO2 coatings is due to the formation of tribofilm in the sliding contact zone.","PeriodicalId":10520,"journal":{"name":"Coatings","volume":null,"pages":null},"PeriodicalIF":2.9000,"publicationDate":"2024-08-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of Graphite and Zirconia Addition on the Tribological Properties of Plasma-Sprayed Alumina Coatings\",\"authors\":\"Liutauras Marcinauskas, Karina Ratautaitė, Žydrūnas Kavaliauskas, Audrius Žunda, Romualdas Kėželis, Mindaugas Aikas\",\"doi\":\"10.3390/coatings14080978\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Al2O3, Al2O3-graphite and Al2O3-ZrO2 coatings were formed on the C45 steel rolls using atmospheric plasma spraying. The influence of graphite and zirconia addition on the surface morphology, phase composition and tribological properties under dry sliding conditions using 30 N load were analyzed. It was found that the addition of graphite or ZrO2 slightly affected the fraction of the α-Al2O3 and γ-Al2O3 phases in the alumina coatings. The highest mass loss rate (~8.84 × 10−4 g/s) was obtained for the friction pair of C45 steel roll and steel plate. The friction coefficient of the Al2O3-graphite coating was slightly lower (up to 7%) compared to the coating of Al2O3-ZrO2. However, the friction pair of Al2O3-ZrO2 coating and steel plate demonstrated the highest wear resistance under dry sliding conditions. The increase in the wear resistance of the Al2O3-graphite and Al2O3-ZrO2 coatings is due to the formation of tribofilm in the sliding contact zone.\",\"PeriodicalId\":10520,\"journal\":{\"name\":\"Coatings\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.9000,\"publicationDate\":\"2024-08-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Coatings\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.3390/coatings14080978\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, COATINGS & FILMS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Coatings","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.3390/coatings14080978","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, COATINGS & FILMS","Score":null,"Total":0}
Influence of Graphite and Zirconia Addition on the Tribological Properties of Plasma-Sprayed Alumina Coatings
Al2O3, Al2O3-graphite and Al2O3-ZrO2 coatings were formed on the C45 steel rolls using atmospheric plasma spraying. The influence of graphite and zirconia addition on the surface morphology, phase composition and tribological properties under dry sliding conditions using 30 N load were analyzed. It was found that the addition of graphite or ZrO2 slightly affected the fraction of the α-Al2O3 and γ-Al2O3 phases in the alumina coatings. The highest mass loss rate (~8.84 × 10−4 g/s) was obtained for the friction pair of C45 steel roll and steel plate. The friction coefficient of the Al2O3-graphite coating was slightly lower (up to 7%) compared to the coating of Al2O3-ZrO2. However, the friction pair of Al2O3-ZrO2 coating and steel plate demonstrated the highest wear resistance under dry sliding conditions. The increase in the wear resistance of the Al2O3-graphite and Al2O3-ZrO2 coatings is due to the formation of tribofilm in the sliding contact zone.
CoatingsMaterials Science-Surfaces, Coatings and Films
CiteScore
5.00
自引率
11.80%
发文量
1657
审稿时长
1.4 months
期刊介绍：
Coatings is an international, peer-reviewed open access journal of coatings and surface engineering. It publishes reviews, research articles, communications and technical notes. Our aim is to encourage scientists to publish their experimental and theoretical results in as much detail as possible. There is no restriction on the length of the papers. Full experimental and/or methodical details must be provided. There are, in addition, unique features of this journal:
* manuscripts regarding research proposals and research ideas will be particularly welcomed
* electronic files or software regarding the full details of the calculation and experimental procedure - if unable to be published in a normal way - can be deposited as supplementary material
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
