An online error compensation strategy for hybrid robot based on grating feedback

Purpose

This paper aims to enhance the machining accuracy of hybrid robots by treating the moving platform as the first joint of a serial robot for direct position measurement and integrating external grating sensors with motor encoders for real-time error compensation.

Design/methodology/approach

Initially, a spherical coordinate system is established using one linear and two circular grating sensors. This system enables direct acquisition of the moving platform’s position in the hybrid robot. Subsequently, during the coarse interpolation stage, the motor command for the next interpolation point is dynamically updated using error data from external grating sensors and motor encoders. Finally, fuzzy proportional integral derivative (PID) control is applied to maintain robot stability post-compensation.

Findings

Experiments were conducted on the TriMule-600 hybrid robot. The results indicate that the following errors of the five grating sensors are reduced by 94%, 93%, 80%, 75% and 88% respectively, after compensation. Using the fourth drive joint as an example, it was verified that fuzzy adaptive PID control performs better than traditional PID control.

Practical implications

The proposed online error compensation strategy significantly enhances the positional accuracy of the robot end, thereby improving the actual processing quality of the workpiece.

Social implications

This method presents a technique for achieving online error compensation in hybrid robots, which promotes the advancement of the manufacturing industry.

Originality/value

This paper proposes a cost-effective and practical method for online error compensation in hybrid robots using grating sensors, which contributes to the advancement of hybrid robot technology.