J Schulz, E C Santos, A Kalliath, B Schmaling, P Zok, S Siegert, I S Dandu, KH Lindner, E Bruder, K Durst
{"title":"印刷参数对 Ti-6Al-4V L-BPF 零件密度的影响以及与压痕测试测得的静态机械性能的相关性","authors":"J Schulz, E C Santos, A Kalliath, B Schmaling, P Zok, S Siegert, I S Dandu, KH Lindner, E Bruder, K Durst","doi":"10.1088/1757-899x/1310/1/012030","DOIUrl":null,"url":null,"abstract":"A complete workflow of parameter development and process qualification of a part manufactured using laser powder bed fusion (L-PBF) AM technique requires data of porosity, pore morphology, distortion and static mechanical properties. Using a combination of two non-destructive techniques: Computed tomography and indentation testing, the influence of printing parameters on defect types and part density in L-PBF of Ti-6Al-4V is described. In addition, the results using the combined method are compared to conventional testing methods.","PeriodicalId":14483,"journal":{"name":"IOP Conference Series: Materials Science and Engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of printing parameters on part density in L-BPF of Ti-6Al-4V and correlation with static mechanical properties measured using indentation testing\",\"authors\":\"J Schulz, E C Santos, A Kalliath, B Schmaling, P Zok, S Siegert, I S Dandu, KH Lindner, E Bruder, K Durst\",\"doi\":\"10.1088/1757-899x/1310/1/012030\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A complete workflow of parameter development and process qualification of a part manufactured using laser powder bed fusion (L-PBF) AM technique requires data of porosity, pore morphology, distortion and static mechanical properties. Using a combination of two non-destructive techniques: Computed tomography and indentation testing, the influence of printing parameters on defect types and part density in L-PBF of Ti-6Al-4V is described. In addition, the results using the combined method are compared to conventional testing methods.\",\"PeriodicalId\":14483,\"journal\":{\"name\":\"IOP Conference Series: Materials Science and Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IOP Conference Series: Materials Science and Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1088/1757-899x/1310/1/012030\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IOP Conference Series: Materials Science and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1088/1757-899x/1310/1/012030","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Influence of printing parameters on part density in L-BPF of Ti-6Al-4V and correlation with static mechanical properties measured using indentation testing
A complete workflow of parameter development and process qualification of a part manufactured using laser powder bed fusion (L-PBF) AM technique requires data of porosity, pore morphology, distortion and static mechanical properties. Using a combination of two non-destructive techniques: Computed tomography and indentation testing, the influence of printing parameters on defect types and part density in L-PBF of Ti-6Al-4V is described. In addition, the results using the combined method are compared to conventional testing methods.