A Novel Carbon Paste Electrode Modified with N1-Hydroxy-N1,N2-Diphenylbenzamidine for the Electrochemical Determination of Cadmium(II) in Environmental Samples.

The present study introduces a novel electrode for rapid, highly sensitive, and selective electrochemical sensor for cadmium(II) using 5% N¹-hydroxy-N¹,N²-diphenylbenzamidine (HDPBA) modified carbon paste electrode (CPE) (HDPBA‒CPE). Surface characterizations and structural analysis of the proposed HDPBA‒CPE were performed using several analytical techniques. The voltammetric measurements of Cd(II) were conducted by cyclic voltammetry (CV) and square wave anodic stripping voltammetry (SWASV). Several experimental conditions such as composition and pH of buffer solutions, HDPBA composition, accumulation potential and time, and other voltammetric conditions were optimized. Cd(II) was preconcentrated on the modified electrode surface for 270 s using Britton Robinson (B-R) buffer (0.1 M, pH 4) at -1.0 V versus Ag/AgCl, followed by electrochemical oxidation of the accumulated Cd(II) in the positive scan of SWASV after a quiet time of 10 s. Under optimized parameters, the proposed method showed a linear range of 0.3-100 nM Cd(II) with a detection limit of 0.032 nM. The fabricated HDPBA-modified carbon paste electrode exhibited excellent sensitivity, selectivity, stability, and reproducibility (with RSD of 3.8%). The developed HDPBA‒CPE was used for the quantification of Cd(II) in tobacco and environmental water samples, and it was found to be applicable for the determination of different types of real samples.