磨损相关表面形貌的过程测量和分析实验装置

IF 2.4 3区 工程技术 Q3 ENGINEERING, MANUFACTURING Journal of Manufacturing Science and Engineering-transactions of The Asme Pub Date : 2023-08-08 DOI:10.1115/1.4063133
Nils Potthoff, J. Liss, P. Wiederkehr
{"title":"磨损相关表面形貌的过程测量和分析实验装置","authors":"Nils Potthoff, J. Liss, P. Wiederkehr","doi":"10.1115/1.4063133","DOIUrl":null,"url":null,"abstract":"\n High-strength and corrosion-resistant materials, such as the nickel-based superalloy Inconel 718, are widely used in the energy and aerospace industries. However, machining these materials results in high process forces and significant tool wear. This tool wear has a negative effect on the resulting surface topography. Nevertheless, the accuracy requirements for functional surfaces are extreme high. Simulation systems can be used to design these processes. However, time-consuming and cost-intensive experiments often have to be conducted to develop and parameterize the required models. To overcome this problem, an analogy test setup for in-process measurements of wear-dependent properties was developed, which allows a multi-level evaluation of the process. By combining different measurement techniques, wear-dependent process characteristics can be determined and analyzed and, thus significantly reducing the measurement effort typically required.","PeriodicalId":16299,"journal":{"name":"Journal of Manufacturing Science and Engineering-transactions of The Asme","volume":null,"pages":null},"PeriodicalIF":2.4000,"publicationDate":"2023-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental setup for in-process measurements and analysis of wear-dependent surface topographies\",\"authors\":\"Nils Potthoff, J. Liss, P. Wiederkehr\",\"doi\":\"10.1115/1.4063133\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n High-strength and corrosion-resistant materials, such as the nickel-based superalloy Inconel 718, are widely used in the energy and aerospace industries. However, machining these materials results in high process forces and significant tool wear. This tool wear has a negative effect on the resulting surface topography. Nevertheless, the accuracy requirements for functional surfaces are extreme high. Simulation systems can be used to design these processes. However, time-consuming and cost-intensive experiments often have to be conducted to develop and parameterize the required models. To overcome this problem, an analogy test setup for in-process measurements of wear-dependent properties was developed, which allows a multi-level evaluation of the process. By combining different measurement techniques, wear-dependent process characteristics can be determined and analyzed and, thus significantly reducing the measurement effort typically required.\",\"PeriodicalId\":16299,\"journal\":{\"name\":\"Journal of Manufacturing Science and Engineering-transactions of The Asme\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.4000,\"publicationDate\":\"2023-08-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Manufacturing Science and Engineering-transactions of The Asme\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1115/1.4063133\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MANUFACTURING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Manufacturing Science and Engineering-transactions of The Asme","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1115/1.4063133","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
引用次数: 0

摘要

高强度和耐腐蚀材料,如镍基高温合金Inconel 718,广泛应用于能源和航空航天行业。然而,加工这些材料会导致高加工力和显著的工具磨损。这种刀具磨损对产生的表面形貌有负面影响。然而,功能表面的精度要求极高。仿真系统可用于设计这些过程。然而,为了开发所需的模型并将其参数化,通常必须进行耗时且成本密集的实验。为了克服这个问题,开发了一种用于磨损相关性能的过程中测量的模拟测试装置,该装置允许对过程进行多层次评估。通过结合不同的测量技术,可以确定和分析与磨损相关的工艺特性,从而显著减少通常需要的测量工作量。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Experimental setup for in-process measurements and analysis of wear-dependent surface topographies
High-strength and corrosion-resistant materials, such as the nickel-based superalloy Inconel 718, are widely used in the energy and aerospace industries. However, machining these materials results in high process forces and significant tool wear. This tool wear has a negative effect on the resulting surface topography. Nevertheless, the accuracy requirements for functional surfaces are extreme high. Simulation systems can be used to design these processes. However, time-consuming and cost-intensive experiments often have to be conducted to develop and parameterize the required models. To overcome this problem, an analogy test setup for in-process measurements of wear-dependent properties was developed, which allows a multi-level evaluation of the process. By combining different measurement techniques, wear-dependent process characteristics can be determined and analyzed and, thus significantly reducing the measurement effort typically required.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
6.80
自引率
20.00%
发文量
126
审稿时长
12 months
期刊介绍: Areas of interest including, but not limited to: Additive manufacturing; Advanced materials and processing; Assembly; Biomedical manufacturing; Bulk deformation processes (e.g., extrusion, forging, wire drawing, etc.); CAD/CAM/CAE; Computer-integrated manufacturing; Control and automation; Cyber-physical systems in manufacturing; Data science-enhanced manufacturing; Design for manufacturing; Electrical and electrochemical machining; Grinding and abrasive processes; Injection molding and other polymer fabrication processes; Inspection and quality control; Laser processes; Machine tool dynamics; Machining processes; Materials handling; Metrology; Micro- and nano-machining and processing; Modeling and simulation; Nontraditional manufacturing processes; Plant engineering and maintenance; Powder processing; Precision and ultra-precision machining; Process engineering; Process planning; Production systems optimization; Rapid prototyping and solid freeform fabrication; Robotics and flexible tooling; Sensing, monitoring, and diagnostics; Sheet and tube metal forming; Sustainable manufacturing; Tribology in manufacturing; Welding and joining
期刊最新文献
CONTINUOUS STEREOLITHOGRAPHY 3D PRINTING OF MULTI-NETWORK HYDROGELS IN TRIPLY PERIODIC MINIMAL STRUCTURES (TPMS) WITH TUNABLE MECHANICAL STRENGTH FOR ENERGY ABSORPTION A Review of Prospects and Opportunities in Disassembly with Human-Robot Collaboration The Effect of Microstructure on the Machinability of Natural Fiber Reinforced Plastic Composites: A Novel Explainable Machine Learning (XML) Approach A Digital Twin-based environment-adaptive assignment method for human-robot collaboration Combining Flexible and Sustainable Design Principles for Evaluating Designs: Textile Recycling Application
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1