粗骨料级配对石灰石混凝土力学参数和断裂韧性的影响

IF 2.7 Q2 CONSTRUCTION & BUILDING TECHNOLOGY Infrastructures Pub Date : 2023-07-27 DOI:10.3390/infrastructures8080117
G. Golewski
{"title":"粗骨料级配对石灰石混凝土力学参数和断裂韧性的影响","authors":"G. Golewski","doi":"10.3390/infrastructures8080117","DOIUrl":null,"url":null,"abstract":"This work presents a discussion of the basic properties of broken mineral limestone aggregates with the specification of the properties affecting the fracture toughness of concretes made with these aggregates. To determine the influence of the grain-size distribution of coarse aggregates for each concrete series, two types of aggregate grain were used, with maximum grain sizes of 8 mm (series of concrete L1) and 16 mm (series of concrete L2). Fracture-toughness tests were carried out using mode I fractures in accordance with the RILEM Draft recommendations, TC-89 FMT. During the experiments the critical stress-intensity factor (KIcS) and crack-tip-opening displacements (CTODc) were determined. The main mechanical parameters, i.e., the compressive strength (fcm) and splitting tensile strength (fctm), were also assessed. Based on the obtained results, it was found that the grain-size distribution of the limestone aggregate influenced the concrete’s mechanical and fracture-mechanics parameters. The obtained results showed that the series-L2 concrete had higher strength and fracture-mechanics parameters, i.e.,: fcm—45.06 MPa, fctm—3.03 MPa, KIcS—1.22 MN/m3/2, and CTODc —12.87 m10−6. However, the concrete with a maximum grain size of 8 mm (series of concrete L1) presented lower values for all the analyzed parameters, i.e.,: fcm—39.17 MPa, fctm—2.57 MPa, KIcS—0.99 MN/m3/2, and CTODc —10.02 m10−6. The main reason for the lower fracture toughness of the concretes with smaller grain sizes was the weakness of the ITZ in this composite compared to the ITZ in the concrete with a maximum grain size of 16 mm. The obtained test results can help designers, concrete producers, and contractors working with concrete structures to ensure the more conscious composition of concrete mixes with limestone aggregates, as well as to produce precise forecasts for the operational properties of concrete composites containing fillers obtained from carbonate rocks.","PeriodicalId":13601,"journal":{"name":"Infrastructures","volume":" ","pages":""},"PeriodicalIF":2.7000,"publicationDate":"2023-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Effect of Coarse Aggregate Grading on Mechanical Parameters and Fracture Toughness of Limestone Concrete\",\"authors\":\"G. Golewski\",\"doi\":\"10.3390/infrastructures8080117\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work presents a discussion of the basic properties of broken mineral limestone aggregates with the specification of the properties affecting the fracture toughness of concretes made with these aggregates. To determine the influence of the grain-size distribution of coarse aggregates for each concrete series, two types of aggregate grain were used, with maximum grain sizes of 8 mm (series of concrete L1) and 16 mm (series of concrete L2). Fracture-toughness tests were carried out using mode I fractures in accordance with the RILEM Draft recommendations, TC-89 FMT. During the experiments the critical stress-intensity factor (KIcS) and crack-tip-opening displacements (CTODc) were determined. The main mechanical parameters, i.e., the compressive strength (fcm) and splitting tensile strength (fctm), were also assessed. Based on the obtained results, it was found that the grain-size distribution of the limestone aggregate influenced the concrete’s mechanical and fracture-mechanics parameters. The obtained results showed that the series-L2 concrete had higher strength and fracture-mechanics parameters, i.e.,: fcm—45.06 MPa, fctm—3.03 MPa, KIcS—1.22 MN/m3/2, and CTODc —12.87 m10−6. However, the concrete with a maximum grain size of 8 mm (series of concrete L1) presented lower values for all the analyzed parameters, i.e.,: fcm—39.17 MPa, fctm—2.57 MPa, KIcS—0.99 MN/m3/2, and CTODc —10.02 m10−6. The main reason for the lower fracture toughness of the concretes with smaller grain sizes was the weakness of the ITZ in this composite compared to the ITZ in the concrete with a maximum grain size of 16 mm. The obtained test results can help designers, concrete producers, and contractors working with concrete structures to ensure the more conscious composition of concrete mixes with limestone aggregates, as well as to produce precise forecasts for the operational properties of concrete composites containing fillers obtained from carbonate rocks.\",\"PeriodicalId\":13601,\"journal\":{\"name\":\"Infrastructures\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2023-07-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Infrastructures\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3390/infrastructures8080117\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CONSTRUCTION & BUILDING TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Infrastructures","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/infrastructures8080117","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
引用次数: 3

摘要

这项工作讨论了破碎矿物石灰石骨料的基本性能,以及影响用这些骨料制成的混凝土断裂韧性的性能规范。为了确定每个混凝土系列的粗骨料粒度分布的影响,使用了两种类型的骨料颗粒,最大粒度为8mm(混凝土系列L1)和16mm(混凝土系列L2)。根据RILEM草案建议TC-89 FMT,使用I型断裂进行断裂韧性测试。在实验过程中,确定了临界应力强度因子(KIcS)和裂纹尖端张开位移(CTODc)。还评估了主要的力学参数,即抗压强度(fcm)和劈裂抗拉强度(fctm)。研究结果表明,石灰石骨料的粒度分布对混凝土的力学和断裂力学参数有影响。结果表明,L2系列混凝土具有较高的强度和断裂力学参数,分别为:fcm-45.06MPa、fctm-3.03MPa、KIcS-1.22MN/m3/2和CTODc-12.87m10-6。然而,最大粒径为8 mm的混凝土(混凝土系列L1)的所有分析参数的值都较低,即:fcm-39.17 MPa、fctm-2.57 MPa、KIcS-0.99 MN/m3/2和CTODc-10.02 m10−6。粒径较小的混凝土断裂韧性较低的主要原因是与最大粒径为16mm的混凝土中的ITZ相比,以及与混凝土结构合作的承包商,以确保使用石灰石骨料的混凝土混合物的成分更加合理,并对含有碳酸盐岩填料的混凝土复合材料的操作性能进行精确预测。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Effect of Coarse Aggregate Grading on Mechanical Parameters and Fracture Toughness of Limestone Concrete
This work presents a discussion of the basic properties of broken mineral limestone aggregates with the specification of the properties affecting the fracture toughness of concretes made with these aggregates. To determine the influence of the grain-size distribution of coarse aggregates for each concrete series, two types of aggregate grain were used, with maximum grain sizes of 8 mm (series of concrete L1) and 16 mm (series of concrete L2). Fracture-toughness tests were carried out using mode I fractures in accordance with the RILEM Draft recommendations, TC-89 FMT. During the experiments the critical stress-intensity factor (KIcS) and crack-tip-opening displacements (CTODc) were determined. The main mechanical parameters, i.e., the compressive strength (fcm) and splitting tensile strength (fctm), were also assessed. Based on the obtained results, it was found that the grain-size distribution of the limestone aggregate influenced the concrete’s mechanical and fracture-mechanics parameters. The obtained results showed that the series-L2 concrete had higher strength and fracture-mechanics parameters, i.e.,: fcm—45.06 MPa, fctm—3.03 MPa, KIcS—1.22 MN/m3/2, and CTODc —12.87 m10−6. However, the concrete with a maximum grain size of 8 mm (series of concrete L1) presented lower values for all the analyzed parameters, i.e.,: fcm—39.17 MPa, fctm—2.57 MPa, KIcS—0.99 MN/m3/2, and CTODc —10.02 m10−6. The main reason for the lower fracture toughness of the concretes with smaller grain sizes was the weakness of the ITZ in this composite compared to the ITZ in the concrete with a maximum grain size of 16 mm. The obtained test results can help designers, concrete producers, and contractors working with concrete structures to ensure the more conscious composition of concrete mixes with limestone aggregates, as well as to produce precise forecasts for the operational properties of concrete composites containing fillers obtained from carbonate rocks.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Infrastructures
Infrastructures Engineering-Building and Construction
CiteScore
5.20
自引率
7.70%
发文量
145
审稿时长
11 weeks
期刊最新文献
Exploring the Cyclic Behaviour of URM Walls with and without Damp-Proof Course (DPC) Membranes through Discrete Element Method Modeling Variability in Seismic Analysis of Concrete Gravity Dams: A Parametric Analysis of Koyna and Pine Flat Dams Smartphone-Based Cost-Effective Pavement Performance Model Development Using a Machine Learning Technique with Limited Data State of the Art Review of Ageing of Bituminous Binders and Asphalt Mixtures: Ageing Simulation Techniques, Ageing Inhibitors and the Relationship between Simulated Ageing and Field Ageing On the Generation of Digital Data and Models from Point Clouds: Application to a Pedestrian Bridge Structure
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1