Smart heat isolator with hollow multishelled structures

Safe, green and efficient industrial production has always been the pursuit of the chemical industry. Since thermal energy is the driving force for most of chemical reactions, an ideal reaction tank would have the capacity to automatically regulate heat conduction rate. In detail, this reaction tank should endow an ability that resists the heat loss when the reaction temperature is lower than the target, while accelerating the heat dissipation when the system is overheated. In this case, this smart reactor can not only minimize energy consumption but also reduce safety risks. Hollow structures are known to reduce heat conductivity. Particularly, the hollow structure with multishells can provide more interfaces and thus further inhibit heat transmission, which would be more favorable for heat isolation. Step forward, by coupling HoMSs with temperature-sensitive polymer, a smart heat isolation material has been fabricated in this work. It performs as a good heat isolator at a relatively lower temperature. A heat insulation effect of 6.5 °C can be achieved for the TSPU/3S–TiO₂ HoMSs with a thickness of 1 mm under the temperature field of 50 °C. The thermal conductivity of composite material would be raised under overheating conditions. Furthermore, this composite displays an unusual two-stage phase transformation during heating. Benefiting from the unique multishelled structure, energy is found to be gradually guided into the hollow structure and stored inside. This localized heat accumulation enables the composite to be a potential coating material for intelligent thermal-regulator and site-defined micro-reactor.