Selective determination of the chlorine dioxide mass concentration in industrial emissions by the capillary electrophoresis

The task of the selective determination of chlorine dioxide in gas environments, including the emissions from the pulp and paper mills, is relevant and in demand. Current article presents a brief review of the existing methods and procedures for measuring the chlorine dioxide in liquid and gas environments, and identifies the problems in controlling the chlorine dioxide in industrial emissions from the pulp and paper production due to the influence of the related substances: molecular chlorine, hydrochloride, hydrochlorate and sulfur dioxide. measuring of its mass concentration by the capillary electrophoresis. The conditions of sampling, all stages of sample preparation and measurements on the instrument were optimized. Based on the experimental studies, a method for measuring the chlorine dioxide in the industrial emissions in the form of chlorite ion in the range from 0.025 to 0.3 mg/m 3 with an expanded uncertainty of 25 % has been developed. The contributions of the components of uncertainties affecting the measurement result were summarized in the budget of the uncertainties prepared during the metrological certification of the measurement procedure. The developed method is more selective and reliable in comparison to the traditional methods (“wet chemistry”) used for the measuring of the chlorine dioxide in industrial emissions.