{"title":"剪切压缩状态下历史砌体墙体试验与数值研究","authors":"F. D. Fabio, A. Gregori, Matteo Totani","doi":"10.3846/2029882X.2016.1145073","DOIUrl":null,"url":null,"abstract":"AbstractThe paper presents the experimental investigation carried out on wall specimens reproducing the ancient masonry of several monumental building located in the old city centre of L'Aquila (Italy) and damaged by the April 2009 earthquake. The wall specimens were prepared in accordance with the traditional technique, using original stone elements and typical poor mortar. Subsequently, the specimens were consolidated with mortar injections. Other specimens were also reinforced with Ultra High Tensile Strength Steel wires applied as coating technique (not wrapped). Shear-compression tests were carried out on the wall specimens to evaluate the effects of the reinforcements both in terms of final stiffness and strength of the specimens. A non-linear Finite Element Model (FEM) was developed to reproduce the experimental tests and to better understand the damage phenomena. The load-displacement curves predicted by the FEM compared quite well with the experimental ones. The failure mode of the specimens was ...","PeriodicalId":11839,"journal":{"name":"Engineering Structures and Technologies","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2015-10-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.3846/2029882X.2016.1145073","citationCount":"6","resultStr":"{\"title\":\"Experimental and numerical investigations on historical masonry wall specimens tested in shear-compression configuration\",\"authors\":\"F. D. Fabio, A. Gregori, Matteo Totani\",\"doi\":\"10.3846/2029882X.2016.1145073\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"AbstractThe paper presents the experimental investigation carried out on wall specimens reproducing the ancient masonry of several monumental building located in the old city centre of L'Aquila (Italy) and damaged by the April 2009 earthquake. The wall specimens were prepared in accordance with the traditional technique, using original stone elements and typical poor mortar. Subsequently, the specimens were consolidated with mortar injections. Other specimens were also reinforced with Ultra High Tensile Strength Steel wires applied as coating technique (not wrapped). Shear-compression tests were carried out on the wall specimens to evaluate the effects of the reinforcements both in terms of final stiffness and strength of the specimens. A non-linear Finite Element Model (FEM) was developed to reproduce the experimental tests and to better understand the damage phenomena. The load-displacement curves predicted by the FEM compared quite well with the experimental ones. The failure mode of the specimens was ...\",\"PeriodicalId\":11839,\"journal\":{\"name\":\"Engineering Structures and Technologies\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2015-10-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.3846/2029882X.2016.1145073\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Engineering Structures and Technologies\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3846/2029882X.2016.1145073\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering Structures and Technologies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3846/2029882X.2016.1145073","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Experimental and numerical investigations on historical masonry wall specimens tested in shear-compression configuration
AbstractThe paper presents the experimental investigation carried out on wall specimens reproducing the ancient masonry of several monumental building located in the old city centre of L'Aquila (Italy) and damaged by the April 2009 earthquake. The wall specimens were prepared in accordance with the traditional technique, using original stone elements and typical poor mortar. Subsequently, the specimens were consolidated with mortar injections. Other specimens were also reinforced with Ultra High Tensile Strength Steel wires applied as coating technique (not wrapped). Shear-compression tests were carried out on the wall specimens to evaluate the effects of the reinforcements both in terms of final stiffness and strength of the specimens. A non-linear Finite Element Model (FEM) was developed to reproduce the experimental tests and to better understand the damage phenomena. The load-displacement curves predicted by the FEM compared quite well with the experimental ones. The failure mode of the specimens was ...