Large Scale Placement For Multilateral Wells Using Network Optimization

Multilateral wells are an evolution of horizontal wells in which several wellbore branches radiate from the main borehole. In the last two decades, multilateral wells have been increasingly utilized in producing hydrocarbon reservoirs. The main advantage of using such technology against conventional and single-bore wells comes from the additional access to reservoir rock by maximizing the reservoir contact with fewer resources. Today, multilateral wells are rapidly becoming more complex in both designs and architecture (i.e., extended reach wells, maximum reservoir contact, and extreme reservoir contact wells). Certain multilateral design templates prevail in the industry, such as fork and fishbone types, which tend to be populated throughout the reservoir of interest with no significant changes to the original architecture and, therefore, may not fully realize the reservoir's potential. Placement of optimal multilateral wells is a multivariable problem, which is a function of determining the best well locations and trajectories in a hydrocarbon reservoir with the ultimate objectives of maximizing productivity and recovery. The placement of the multilateral wells can be subject to many constraints such as the number of wells required, maximum length limits, and overall economics. This paper introduces a novel technology for placement of multilateral wells in hydrocarbon reservoirs utilizing a transshipment network optimization approach. This method generates scenarios of multiple wells with different designs honoring the most favorable completion points in a reservoir. In addition, the algorithm was developed to find the most favorable locations and trajectories for the multilateral wells in both local and global terms. A partitioning algorithm is uniquely utilized to reduce the computational cost of the process. The proposed method will not only create different multilateral designs; it will justify the trajectories of every borehole section generated. The innovative method is capable of constructing hundreds of multilateral wells with design variations in large-scale reservoirs. As the complexity of the reservoirs (e.g., active forces that influence fluid mobility) and heterogeneity dictate variability in performance at different area of the reservoir, multilateral wells should be constructed to capture the most productive zones. The new method also allows different levels of branching for the laterals (i.e., laterals can emanate from the motherbore, from other laterals or from subsequent branches). These features set the stage for a new generation of multilateral wells to achieve the most effective reservoir contact.