现代化工厂的建设。在Terra di Lavoro引入预制

F. Castanò
{"title":"现代化工厂的建设。在Terra di Lavoro引入预制","authors":"F. Castanò","doi":"10.4995/vitruvioijats.2023.19095","DOIUrl":null,"url":null,"abstract":"This paper focuses on the investigation and understanding of the industrial heritage designed and built in Campania region, between Naples and Caserta, by the most important Italian architects and engineers in the post-war season. The principal aim of this paper is to present the rich and heterogeneous catalogue of factories designed in these years through unpublished drawings and photos from the building sites. \nThese examples show a notion of modularity that brings interesting innovations in terms of on-site prefabrication of modular components and construction systems. The construction of these factories is therefore in contrast with Italy’s traditional building techniques based on craft approach and intense use of labour. The project of these factories is the outcome of the effort of famous architects and engineers, such as Lugi Figini e Gino Pollini, Angelo Mangiarotti, Marco Zanuso, Eduardo Vittoria, and Gigi Ghò, who experimented new structural solutions based on the orderly and coherent composition of prefabricated elements.  This research stems from the revitalised interest in studies of prefabrication in Italy between the 50's to the 70's of the last century, and about the innovative aesthetic outcomes developed from it. In addition, this paper contributes to evaluate the qualitative connections between construction, geography and labour, assessing the friction between the advanced products and knowledge imported from the North and the agricultural vocation of these regions. The paper will also put in relation the development of prefabrication systems in the less-developed South of Italy in the wider context of the great industrialization boosted by political decisions and state financial helps of “Cassa del Mezzogiorno”.","PeriodicalId":40999,"journal":{"name":"VITRUVIO-International Journal of Architectural Technology and Sustainability","volume":null,"pages":null},"PeriodicalIF":0.4000,"publicationDate":"2023-05-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The construction of the modern factory. The introduction of prefabrication in Terra di Lavoro\",\"authors\":\"F. Castanò\",\"doi\":\"10.4995/vitruvioijats.2023.19095\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper focuses on the investigation and understanding of the industrial heritage designed and built in Campania region, between Naples and Caserta, by the most important Italian architects and engineers in the post-war season. The principal aim of this paper is to present the rich and heterogeneous catalogue of factories designed in these years through unpublished drawings and photos from the building sites. \\nThese examples show a notion of modularity that brings interesting innovations in terms of on-site prefabrication of modular components and construction systems. The construction of these factories is therefore in contrast with Italy’s traditional building techniques based on craft approach and intense use of labour. The project of these factories is the outcome of the effort of famous architects and engineers, such as Lugi Figini e Gino Pollini, Angelo Mangiarotti, Marco Zanuso, Eduardo Vittoria, and Gigi Ghò, who experimented new structural solutions based on the orderly and coherent composition of prefabricated elements.  This research stems from the revitalised interest in studies of prefabrication in Italy between the 50's to the 70's of the last century, and about the innovative aesthetic outcomes developed from it. In addition, this paper contributes to evaluate the qualitative connections between construction, geography and labour, assessing the friction between the advanced products and knowledge imported from the North and the agricultural vocation of these regions. The paper will also put in relation the development of prefabrication systems in the less-developed South of Italy in the wider context of the great industrialization boosted by political decisions and state financial helps of “Cassa del Mezzogiorno”.\",\"PeriodicalId\":40999,\"journal\":{\"name\":\"VITRUVIO-International Journal of Architectural Technology and Sustainability\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.4000,\"publicationDate\":\"2023-05-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"VITRUVIO-International Journal of Architectural Technology and Sustainability\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4995/vitruvioijats.2023.19095\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"N/A\",\"JCRName\":\"ARCHITECTURE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"VITRUVIO-International Journal of Architectural Technology and Sustainability","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4995/vitruvioijats.2023.19095","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"N/A","JCRName":"ARCHITECTURE","Score":null,"Total":0}
引用次数: 0

摘要

本文的重点是对战后意大利最重要的建筑师和工程师在那不勒斯和卡塞塔之间的坎帕尼亚地区设计和建造的工业遗产的调查和理解。本文的主要目的是通过未发表的建筑工地的图纸和照片来呈现这些年来设计的丰富多样的工厂目录。这些例子展示了模块化的概念,在模块化组件和建筑系统的现场预制方面带来了有趣的创新。因此,这些工厂的建设与意大利传统的基于工艺方法和大量使用劳动力的建筑技术形成鲜明对比。这些工厂项目是著名建筑师和工程师努力的结果,如Lugi Figini e Gino Pollini, Angelo Mangiarotti, Marco Zanuso, Eduardo Vittoria和Gigi Ghò,他们在有序和连贯的预制元素组成的基础上尝试了新的结构解决方案。这项研究源于意大利在上世纪50年代到70年代之间对预制研究的复兴兴趣,以及由此产生的创新美学成果。此外,本文还有助于评估建筑、地理和劳动力之间的定性联系,评估从北方引进的先进产品和知识与这些地区的农业职业之间的摩擦。本文还将在政治决策和国家财政援助“Cassa del Mezzogiorno”推动的大工业化的更广泛背景下,在欠发达的意大利南部发展预制系统。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
The construction of the modern factory. The introduction of prefabrication in Terra di Lavoro
This paper focuses on the investigation and understanding of the industrial heritage designed and built in Campania region, between Naples and Caserta, by the most important Italian architects and engineers in the post-war season. The principal aim of this paper is to present the rich and heterogeneous catalogue of factories designed in these years through unpublished drawings and photos from the building sites. These examples show a notion of modularity that brings interesting innovations in terms of on-site prefabrication of modular components and construction systems. The construction of these factories is therefore in contrast with Italy’s traditional building techniques based on craft approach and intense use of labour. The project of these factories is the outcome of the effort of famous architects and engineers, such as Lugi Figini e Gino Pollini, Angelo Mangiarotti, Marco Zanuso, Eduardo Vittoria, and Gigi Ghò, who experimented new structural solutions based on the orderly and coherent composition of prefabricated elements.  This research stems from the revitalised interest in studies of prefabrication in Italy between the 50's to the 70's of the last century, and about the innovative aesthetic outcomes developed from it. In addition, this paper contributes to evaluate the qualitative connections between construction, geography and labour, assessing the friction between the advanced products and knowledge imported from the North and the agricultural vocation of these regions. The paper will also put in relation the development of prefabrication systems in the less-developed South of Italy in the wider context of the great industrialization boosted by political decisions and state financial helps of “Cassa del Mezzogiorno”.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
1.10
自引率
12.50%
发文量
9
审稿时长
20 weeks
期刊最新文献
Innovative housing policy tools: impact indicators in the NRRP Urban Regeneration Programmes A participatory project for the Librino Social Housing Community. Social housing in Spain: obsolescence and intervention strategies A new construction approach for tiny house on wheels: POD THOWs Sustainable strategies to preserve tangible and intangible values in social housing rehabilitation: an Italian case study.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1