Effect of electrolyte solution and deposition methods on TiO2/CdS core–shell nanotube arrays for photoelectrocatalytic application

In this work, TiO2 nanostructure thin films were deposited by using anodization technique, while CdS thin films were deposited on TiO2 films by two methods chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR). The structure of TiO2 /CdS films were investigated and analyzed by XRD, SEM, and AFM, but the optical properties were investigated by UV–visible spectroscopy, PL spectroscopy, and spectral response. XRD analysis of all deposited films has confirmed the formation of two phases one is tetragonal phase (anatase, and rutile) for TiO2 , and second hexagonal phase which belong to CdS layer. SEM images of TiO2 nanotubes arrays (NTAs)/CdS showed the TiO2 NTs walls become decorated with aggregates of fine CdS nanoparticles that partly penetrate into the TiO2 NTAs pores. AFM measurements displayed increase in the surface roughness compared with TiO2 films. PL measurement results of TiO2 /CdS core–shell show two peaks, one is located at UV-region pointed to energy band gap for TiO2 nano films, and second one is located at visible region pointing to recombination of photogenerated electron–hole pairs within CdS layers. Spectral response measurements showed photocurrent peaks for all TiO2 /CdS films deposited with different electrolyte solution have red-shift to visible region. When illuminated with a UV–Vis light source, the TiO2 /CdS core–shell films displayed high response. A higher response to UV–Vis light was attained with the use of TiO2 NTAs/CdS films prepared by anodization /CBD. This approach offers a technique for fabricating photoelectrodes.