STUDY OF THE PROCESS OF OBTAINING ALTERNATIVE MOTOR FUELS USING VEGETABLE OILS

The growing shortage of oil resources makes it necessary to find alternative energy sources. The leading place among them today belongs to biofuels, both due to sufficient and affordable resources, and relatively advanced technologies for their production. The requirements of modern standards for the quality of the resulting gasolines limit the content of aromatic hydrocarbons in them to no more than 42% by mass. (Euro-3), and 35% of the mass. (Euro-4 and Euro-5). Therefore, studies on the involvement of vegetable raw materials in the processes of obtaining gasoline fractions are aimed either at obtaining highly aromatic gasoline with its subsequent compounding, or at searching for catalytic systems that make it possible, if any, to reduce the content of aromatic hydrocarbons in the composition of the resulting gasolines during joint cracking of the mixture of oil and vegetable raw materials. In this work, using the model oleic acid as an example, the mechanism of the conversion of fatty acids of vegetable oils during their catalytic conversion into hydrocarbons of the gasoline series was studied. The process was studied using a mixture of vacuum gas oil with vegetable oils as cracking catalysts, industrial cracking catalysts Omnikat-210P and Tseokar-600 in pure form and in their mixture with natural halloysite nanotubes. Halloysites belong to the family of kaolinite clay minerals with a high Al/Si ratio as compared to other aluminosilicates and have a predominantly hollow tubular structure and consist of layers of aluminum and silicon oxides that are rolled into tubes. The process of catalytic cracking of vacuum gas oil with the involvement of vegetable oils (waste vegetable oils taken from the Chudo-Pechka chain of stores) in the amount of 5 wt % was studied.