A model for productivity improvement on machining of components for stamping dies

[1] Schützer, K., Helleno, A. L., Pereira, S. C., “The influence of the manufacturing strategy on the production of molds and dies”, Journal of Materials Processing Technology, Vol. 179(1-3), pp. 172-177, 2006. [2] Dalavi, A. M., Pawar, P. J., Singh, T. P., Warke, A. S., Paliwal, P. D., “Review on Optimization of Hole-Making Operations for Injection Mould Using Non-Traditional Algorithms”, International Journal of Industrial Engineering and Management, Vol. 7(1), pp. 9-14, 2016. [3] Castro, T. A. M., Silva, F. J. G. and Campilho, R. D. S. G., “Optimising a specific tool for electrical terminals crimping process”, Procedia Manufacturing, Vol. 11, pp. 1438-1447, 2017. [4] Yun, S., Kwon, J., Cho, W., Lee, D. C. and Kim, Y., “Performance improvement of hot stamping die for patchwork blank using mixed cooling channel designs with straight and conformal channels”, Applied Thermal Engineering, Vol. 165, 114562, 2020. [5] Maeno, T., Mori, K.-I. and Fujimoto, M., “Improvements in productivity and formability by water and die quenching in hot stamping of ultra-high strength steel parts”, CIRP Annals, Vol. 64, No. 1, pp. 281-284, 2015. [6] Otsuka, A., Miyoshi, N., Nagata, F., “Generation method of skin model shapes with features of machining marks using dual-tree complex wavelet transform”, Procedia CIRP, Vol. 92, pp. 224-229, 2020. [7] Tapie, L., Mawussi, B., Bernard, A., “Topological model for machining of parts with complex shapes”, Computers in Industry, Vol. 63(5), pp. 528-541, 2012. [8] Silva, C. R. M., Silva, F. J. G. and Gouveia, R. M., “Investigations on the edge crack defectsin dual phase steel stamping process”, Procedia Manufacturing, Vol.17, pp. 737-745, 2018. [9] Béres, G., Lukács, Z., Tisza, M., “Springback Evaluation of Tailor Welded Blanks at V-die Bending made of DP Steels”, Procedia Manufacturing, Vol. 47, pp. 1366-1373, 2020. [10] Gomes, T., Silva, F. J. G., Campilho and R. D. G. S., “Reducing the simulation cost on dual-phase steel stamping process”, Procedia Manufacturing, Vol. 11, pp. 474-481, 2017. [11] Fernandes L., Silva, F.J.G., Andrade, M.F., Alexandre, R., Baptista, A.P.M. and Rodrigues, C., “Increasing the stamping tools lifespan by using Mo and B4C PVD coatings”, Surface and Coatings Technology, Vol. 325, pp. 107-119, 2017. [12] Fernandes, L., Silva, F.J.G., Paiva, O. C., Baptista, A. and Pinto, G., “Minimizing the adhesion effects in food package forming by the use of advanced coatings”, Procedia Manufacturing, Vol. 17, pp. 886-894, 2018. [13] Fernandes, L., Silva, F. J. G. and Alexandre, R., “Study of TiAlN PVD Coating on stamping dies used in tinplate food package production”, Micromachines, Vol. 10, No. 3, pp. 182-198, 2019. [14] Nunes, V., Silva, F.J.G., Andrade, M.F., Alexandre, R. and Baptista, A.P.M., “Increasing the lifespan of high-pressure die cast molds subjected to severe wear”, Surface and Coatings Technology, Vol. 332, pp. 319-331, 2017. [15] Silva, F., Martinho, R., Andrade, M., Baptista, A. and Alexandre, R., “Improving the wear resistance of moulds for the injection of glass fibre–reinforced plastics using PVD coatings: a comparative study”, Coatings, Vol. 7, No. 2, pp. 28-39, 2017. [16] Martinho, R. P., Silva, F. J. G., Alexandre, R. J. D. and Baptista, A. P. M., “TiB2 nanostructured coating for GFRP injection moulds”, Journal of Nanoscience and Nanotechnology , Vol. 11, No. 6, pp. 5374-5382, 2011. [17] Moreira, A., Silva, F. J. G., Correia, A. I., Pereira, T., Ferreira, L. P. and Almeida F. de, “Cost reduction and quality improvements in the printing industry”, Procedia Manufacturing, Vol. 17, pp. 623-630, 2018. [18] Hasani, A., Hosseini, S. M. H., “bi-objective flexible flow shop scheduling problem with machine-dependent processing stages: Trade-off between production costs and energy consumption”, Applied Mathematics and Computation, Vol. 386, 125533, 2020. References A model for productivity improvement on machining of components for stamping dies