{"title":"Cu(II)掺杂TiO2光降解Remazol Black B的研究","authors":"M. Momen, M. Rahman, H. Begum, M. Hossain","doi":"10.3329/dujs.v70i1.60383","DOIUrl":null,"url":null,"abstract":"In the present investigation, Cu(II) doped TiO2 was prepared by a precipitation method. The precipitate was calcined at 300 ºC for2 hours. The prepared doped catalyst was characterized by scanning electron microscope (SEM), energy dispersive X-ray (EDX)spectroscopy and X-ray diffractometry (XRD). SEM images revealed that the morphology of the doped catalyst was different fromthat of TiO2. Elemental analysis was accomplished by EDX that indicated the presence of Cu, Ti and O atoms in the prepared sample.XRD analysis confirmed that TiO2 was present as anatase with almost no distortion in peak position due to the presence of Cu(II)in some interstitial sites. Photodegradation of remazol black B (RBB) was carried out at different experimental conditions underdifferent light sources. The catalytic efficiency of Cu(II) doped TiO2 increased up to a certain dosage then reduced with a furtherincrease in the amount of photocatalyst. The optimum conditions for degradation was found at pH 3.0 under UV light. Under theseexperimental conditions, Cu(II) doped TiO2 degraded 98.8% of RBB, on the other hand, undoped TiO2 degraded only 80.0% of RBB.\nDhaka Univ. J. Sci. 70(1): 64-69, 2022 (January)","PeriodicalId":11280,"journal":{"name":"Dhaka University Journal of Science","volume":"17 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Cu(II) Doped TiO2 for Photodegradation of Remazol Black B in Aqueous Solution\",\"authors\":\"M. Momen, M. Rahman, H. Begum, M. Hossain\",\"doi\":\"10.3329/dujs.v70i1.60383\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In the present investigation, Cu(II) doped TiO2 was prepared by a precipitation method. The precipitate was calcined at 300 ºC for2 hours. The prepared doped catalyst was characterized by scanning electron microscope (SEM), energy dispersive X-ray (EDX)spectroscopy and X-ray diffractometry (XRD). SEM images revealed that the morphology of the doped catalyst was different fromthat of TiO2. Elemental analysis was accomplished by EDX that indicated the presence of Cu, Ti and O atoms in the prepared sample.XRD analysis confirmed that TiO2 was present as anatase with almost no distortion in peak position due to the presence of Cu(II)in some interstitial sites. Photodegradation of remazol black B (RBB) was carried out at different experimental conditions underdifferent light sources. The catalytic efficiency of Cu(II) doped TiO2 increased up to a certain dosage then reduced with a furtherincrease in the amount of photocatalyst. The optimum conditions for degradation was found at pH 3.0 under UV light. Under theseexperimental conditions, Cu(II) doped TiO2 degraded 98.8% of RBB, on the other hand, undoped TiO2 degraded only 80.0% of RBB.\\nDhaka Univ. J. Sci. 70(1): 64-69, 2022 (January)\",\"PeriodicalId\":11280,\"journal\":{\"name\":\"Dhaka University Journal of Science\",\"volume\":\"17 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-07-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Dhaka University Journal of Science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3329/dujs.v70i1.60383\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Dhaka University Journal of Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3329/dujs.v70i1.60383","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Cu(II) Doped TiO2 for Photodegradation of Remazol Black B in Aqueous Solution
In the present investigation, Cu(II) doped TiO2 was prepared by a precipitation method. The precipitate was calcined at 300 ºC for2 hours. The prepared doped catalyst was characterized by scanning electron microscope (SEM), energy dispersive X-ray (EDX)spectroscopy and X-ray diffractometry (XRD). SEM images revealed that the morphology of the doped catalyst was different fromthat of TiO2. Elemental analysis was accomplished by EDX that indicated the presence of Cu, Ti and O atoms in the prepared sample.XRD analysis confirmed that TiO2 was present as anatase with almost no distortion in peak position due to the presence of Cu(II)in some interstitial sites. Photodegradation of remazol black B (RBB) was carried out at different experimental conditions underdifferent light sources. The catalytic efficiency of Cu(II) doped TiO2 increased up to a certain dosage then reduced with a furtherincrease in the amount of photocatalyst. The optimum conditions for degradation was found at pH 3.0 under UV light. Under theseexperimental conditions, Cu(II) doped TiO2 degraded 98.8% of RBB, on the other hand, undoped TiO2 degraded only 80.0% of RBB.
Dhaka Univ. J. Sci. 70(1): 64-69, 2022 (January)