Microspectrophotometry of Wood Grain and Color

--A reflecting microscope spectrophotometer was used for the colorimetry of wood using CIE (Commission Internationale de l’Éclairage) chromaticity coordinates. A microscope scanning stage and scanning with optical fibers were used to detect grain patterns. Ten exotic woods with a fine grain structure were tested because they are highly valued in the manufacture of musical instruments and furniture, and they had a wide range in color and grain structure. With lateral illumination (45°) of samples and a large measuring aperture, the results were comparable to those that might be obtained with a commercial colorimeter detecting diffuse Lambertian reflectance. With vertical illumination and coaxial photometry in a microscope, Fresnel reflectance was dominant. The best predictor of CIE x with lateral illumination was reflectance at 400 nm (r = 0.916, P < 0.0005) and the relationship persisted with vertical illumination (r = -0.67, P < 0.025). Scanning across woods at 520 nm with a microscope scanning stage, there were relationships of CIE x with scanning peak height (r = 0.75 P < 0.01). In scanning across 6 cm of wood with optical fibers, there was a relationship of the number of reflectance peaks (from wood grain between dark lines) with peak width (r = 0.89, P < 0.0005). Woods with a fine grain had numerous small peaks while woods with a coarse grain had a few wide peaks. Thus, there is a connection between the color and grain pattern of wood.