Removal of Volatile Toluene Using K2CO3-Activated Carbon Adsorbents Prepared from Buckwheat Hull

Carbon adsorbents for use in the removal of gaseous toluene from the air were prepared from buckwheat (Fagopyrum esculentum Moench) hull. A chemically-activated adsorbent was prepared via the impregnation of raw hull powder with potassium carbonate, followed by thermal decomposition. The chemically-activated adsorbent exhibited improved adsorption capacity for toluene compared to the adsorbent prepared without chemical activation. Toluene concentration in the air decreased from 220 ppm to 160 ppm during 24 h of adsorption using unactivated adsorbent. Only a trace amount of toluene remained after the adsorption under the same conditions using K2CO3-activated adsorbent. This improvement was explained based on experimental results, specifically, iodine adsorption tests, methylene blue adsorption tests, and microscopic observations. Chemical activation dramatically increased the specific surface area of the adsorbent and created mesopores capable of adsorbing toluene. This study revealed that a mesoporous adsorbent for use in volatile toluene removal can be prepared from waste biomass (buckwheat hull) by chemical activation using potassium carbonate.