Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites

Aim: In recent years, tooth-colored, dual-cure, bulk-fill composite resins, which have attracted attention for their ease of use, constitute one of the latest developments in pediatric dentistry applications. This study aimed to evaluate the color stability and surface roughness properties of three different dual-cure, bulk-fill materials and one light-cure, bulk-fill composite material used in pediatric dentistry. Methodology: In this study, three different dual-cure, bulk-fill composites (Fill-Up, HyperFIL, Cention-N) and one light-polymerized bulk-fill composite (Reveal HD) were used. A total of 70 samples were obtained for surface roughness testing. The surface roughness testing was performed with a Hysitron TI 950 Triboindenter device. A total of 105 samples were obtained for the evaluation of color stability. Cherry juice, iced tea, and distilled water were used as solutions. Initial and final color measurements were made using a spectrophotometer. The color differences between measurements were recorded according to the CIEDE 2000 system. Results: The least surface roughness among the composite groups was observed in the light polymerized Cention-N composite samples in the experimental group. In the Fill-Up and Cention-N composite groups in the experimental group, the surface roughness of the samples left to self-polymerization and the samples polymerized with light showed a statistically significant difference (p < 0.05). Among the composite groups, the highest amount of coloring was observed in the Fill-Up composite samples, which were left to self-polymerization and kept in cherry juice in the experimental group. The least coloration among the composite groups was observed in the Cention-N composite samples polymerized with light and kept in distilled water. Conclusion: Based on this information, a decrease in surface roughness and an increase in color stability can be expected due to self-polymerization and the light polymerization of dual-cured, bulk-fill composites.   How to cite this article: Şivgan Güner Z, Bolgül B, İnandı T. Evaluation of the color stability and surface roughness of dual-cure, bulk-fill composites. Int Dent Res 2021;11(Suppl.1):266-273. https://doi.org/10.5577/intdentres.2021.vol11.suppl.39   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.