{"title":"建筑产品标准与评价:以瓷砖胶粘剂为例","authors":"J. Michalak","doi":"10.3390/standards2020013","DOIUrl":null,"url":null,"abstract":"This work attempts to draw attention to the importance of a multidimensional approach when creating standard requirements in the assessment of construction products with the example of ceramic tile adhesives (CTAs). CTAs are an essential group of building materials today, the continuous development of which has been noted since the 1960s. However, until 2001, i.e., the year when EN 12004 was published, there were no precise requirements for CTAs at the European level, which often made it difficult or, in extreme cases, even impossible to assess the product objectively. Under the provisions of EN 12004, for twenty years, the basis for the assessment and verification of constancy of performance (AVCP) of CTAs has been adhesion determined by tensile strength. The paper discusses the test methods, paying attention to their imperfections, including the impact of the materials used in measurements, i.e., concrete slab, ceramic tile, and water quality. The results of the multi-annual interlaboratory tests indicate that an essential factor that must be considered in the process of AVCP is test measurement uncertainty. Additionally, it should be remembered that uncertainty also occurs at other assessment levels. It also seems that the simple acceptance rule that does not consider the variability resulting from the measurement uncertainty is inadequate when assessing CTAs.","PeriodicalId":21933,"journal":{"name":"Standards","volume":"12 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":"{\"title\":\"Standards and Assessment of Construction Products: Case Study of Ceramic Tile Adhesives\",\"authors\":\"J. Michalak\",\"doi\":\"10.3390/standards2020013\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work attempts to draw attention to the importance of a multidimensional approach when creating standard requirements in the assessment of construction products with the example of ceramic tile adhesives (CTAs). CTAs are an essential group of building materials today, the continuous development of which has been noted since the 1960s. However, until 2001, i.e., the year when EN 12004 was published, there were no precise requirements for CTAs at the European level, which often made it difficult or, in extreme cases, even impossible to assess the product objectively. Under the provisions of EN 12004, for twenty years, the basis for the assessment and verification of constancy of performance (AVCP) of CTAs has been adhesion determined by tensile strength. The paper discusses the test methods, paying attention to their imperfections, including the impact of the materials used in measurements, i.e., concrete slab, ceramic tile, and water quality. The results of the multi-annual interlaboratory tests indicate that an essential factor that must be considered in the process of AVCP is test measurement uncertainty. Additionally, it should be remembered that uncertainty also occurs at other assessment levels. It also seems that the simple acceptance rule that does not consider the variability resulting from the measurement uncertainty is inadequate when assessing CTAs.\",\"PeriodicalId\":21933,\"journal\":{\"name\":\"Standards\",\"volume\":\"12 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-05-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"5\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Standards\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3390/standards2020013\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Standards","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/standards2020013","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Standards and Assessment of Construction Products: Case Study of Ceramic Tile Adhesives
This work attempts to draw attention to the importance of a multidimensional approach when creating standard requirements in the assessment of construction products with the example of ceramic tile adhesives (CTAs). CTAs are an essential group of building materials today, the continuous development of which has been noted since the 1960s. However, until 2001, i.e., the year when EN 12004 was published, there were no precise requirements for CTAs at the European level, which often made it difficult or, in extreme cases, even impossible to assess the product objectively. Under the provisions of EN 12004, for twenty years, the basis for the assessment and verification of constancy of performance (AVCP) of CTAs has been adhesion determined by tensile strength. The paper discusses the test methods, paying attention to their imperfections, including the impact of the materials used in measurements, i.e., concrete slab, ceramic tile, and water quality. The results of the multi-annual interlaboratory tests indicate that an essential factor that must be considered in the process of AVCP is test measurement uncertainty. Additionally, it should be remembered that uncertainty also occurs at other assessment levels. It also seems that the simple acceptance rule that does not consider the variability resulting from the measurement uncertainty is inadequate when assessing CTAs.