Dynamic Analysis of Aerosol Release from a Pressurized Metered Dose Inhaler Combined with a Valved Holding Chamber Using Simplified Laser Photometry.

Abstract

Background: A pressurized metered dose inhaler combined with a valved holding chamber (pMDI+VHC) is used to prevent upper airway complications and improve the efficiency of inhaled drug delivery; however, the aerodynamic behavior of the released particles has not been well investigated. This study aimed at clarifying the particle release profiles of a VHC using simplified laser photometry. Methods: An inhalation simulator comprised a computer-controlled pump and a valve system that withdrew aerosol from a pMDI+VHC using a jump-up flow profile. A red laser illuminated the particles leaving VHC and evaluated the intensity of the light reflected by the released particles. Results: The data suggested that the output (OPT) from the laser reflection system represented particle concentration rather than particle mass, and the latter was calculated as OPT × instantaneous withdrawn flow (WF). Summation of OPT hyperbolically decreased with flow increment, whereas summation of OPT × instantaneous flow was not influenced by WF strength. Particle release trajectories consisted of three phases, namely increment with a parabolic curve, flat, and decrement with exponential decay phases. The flat phase appeared exclusively at low-flow withdrawal. These particle release profiles suggest the importance of early phase inhalation. The hyperbolic relationship between WF and particle release time revealed the minimal required withdrawal time at an individual withdrawal strength. Conclusions: The particle release mass was calculated as laser photometric output × instantaneous flow. Simulation of the released particles suggested the importance of early phase inhalation and predicted the minimally required withdrawal time from a pMDI+VHC.