RANGE OF EXHAUST GASES PRE-COOLING IN THE IMPROVED HEAT PUMP SYSTEM OF HEAT SUPPLY

Abstract

The paper studies the range of possible and rational pre-cooling of exhaust gases in an improved heat pump of heating supply system in the development of its previously proposed basic version. The research has established analytical dependences for determining the energy flows of the condenser and evaporator, as well as the energy efficiency of the improved heat supply system. On their basis, a rational range of preliminary cooling of exhaust gases of rotary kilns was revealed, the upper level of which is determined, first of all, by their initial temperature. It has been established that the rational ratio of water consumption for heating systems with traditional temperature drops and hot water supply is in the range of 0.3-0.9. At the same time, an increase in energy efficiency is noted in the process of operational regulation of systems with a decrease in the ratio of the costs of heat carriers for technological and household purposes. The degree of precooling of exhaust gases, which significantly depends on their initial temperature, is in the range of 0.35-0.5 with a decrease in the corresponding flow rates of heat carriers in heating and hot water supply systems. The rational ratio of the consumption of the heating and heated medium in the process of contact interaction, which significantly depends on the initial temperature of the exhaust gases, is in the range of 0.2-1.2. For low-temperature waste gases (up to 500С), the reciprocal values of the analyzed ratio logically agree with the corresponding values of the irrigation coefficient. The results of the analytical study established multifactorial dependences of energy flows in the condenser and evaporator, as well as determining the energy efficiency of an improved heat pump of the heat supply system, on the basis of which the general range of possible pre-cooling of exhaust gases from rotary kilns was revealed.