M. Herrmann, R. Andritschke, M. Bonholzer, G. Hauser, Mie S. Magelund, J. Müller-Seidlitz, J. Reiffers
{"title":"Mitigation of bandwidth limitation induced crosstalk on Athena's WFI","authors":"M. Herrmann, R. Andritschke, M. Bonholzer, G. Hauser, Mie S. Magelund, J. Müller-Seidlitz, J. Reiffers","doi":"10.1117/12.2629620","DOIUrl":null,"url":null,"abstract":"The wide field imager (WFI) for the ATHENA mission will enable the spectroscopic investigation of solid angles up to 40’ in the x-ray regime between 0.2 keV to 15 keV. The required sensors are planed as DEPFET (DEpleted P-channel field-effect transistor) active pixel matrices. These are readout by custom-designed ASICs called VERITAS in a rolling shutter mode. After column parallel processing of the analog signals row-by-row, the resulting pulse heights are multiplexed onto a differential analog line pair. Thus a transmission undisturbed from external influences is achieved. But successive signals can be affected by the limited rise-time of the VERITAS output stage, depending on the signal height, the multiplexing time and the cable length. In order to investigate the impact on the measurements a dedicated cable harness is used during the characterization of a prototype device. The characterizations are performed using either test pulses applied to the VERITAS or with a 55Fe calibration source illuminating the whole sensor. Different cable lengths and multiplexing times are tested to determine the influences. In order to deal with this effect a crosstalk correction algorithm is implemented for the analysis of the photon data. The determined crosstalk factors range up to 2.8% for the longest measured cablings of 2 m with the shortest multiplexing time. Using shorter cables and longer multiplexing times these factors can be reduced to below 1%. In all cases the accompanying effects in the data analysis can be corrected using the developed algorithm.","PeriodicalId":137463,"journal":{"name":"Astronomical Telescopes + Instrumentation","volume":"4 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-08-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Astronomical Telescopes + Instrumentation","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.2629620","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
The wide field imager (WFI) for the ATHENA mission will enable the spectroscopic investigation of solid angles up to 40’ in the x-ray regime between 0.2 keV to 15 keV. The required sensors are planed as DEPFET (DEpleted P-channel field-effect transistor) active pixel matrices. These are readout by custom-designed ASICs called VERITAS in a rolling shutter mode. After column parallel processing of the analog signals row-by-row, the resulting pulse heights are multiplexed onto a differential analog line pair. Thus a transmission undisturbed from external influences is achieved. But successive signals can be affected by the limited rise-time of the VERITAS output stage, depending on the signal height, the multiplexing time and the cable length. In order to investigate the impact on the measurements a dedicated cable harness is used during the characterization of a prototype device. The characterizations are performed using either test pulses applied to the VERITAS or with a 55Fe calibration source illuminating the whole sensor. Different cable lengths and multiplexing times are tested to determine the influences. In order to deal with this effect a crosstalk correction algorithm is implemented for the analysis of the photon data. The determined crosstalk factors range up to 2.8% for the longest measured cablings of 2 m with the shortest multiplexing time. Using shorter cables and longer multiplexing times these factors can be reduced to below 1%. In all cases the accompanying effects in the data analysis can be corrected using the developed algorithm.