A Multiband Strip Line Antenna with Half Ground Structure

2018 International Conference on Computer Communication and Informatics (ICCCI) Pub Date : 1900-01-01 DOI:10.1109/ICCCI.2018.8441240

Ankit Kumar Patel, A. Pandey, S. Yadav, Sweta Singh, Rajeev Singh

引用次数: 1

Abstract

In this paper the radiation characteristics of designed antenna is presented under simultaneous excitation of both ground and patch. The designed antenna operates at multiple frequency bands in 1–100 GHz frequency range. The first four resonating modes have the fractional bandwidth of 29.8%, 8.54%, 16.23% and 12.6% with order by in the frequency range of 2.9-3.9 GHz, 9.5-10.35 GHz, 15.15-17.95 GHz and 20.45-23.2 GHz respectively. The practical implementation of the proposed antenna is suitable for WiMAX (3.5 GHz), satellite communication (S, X, Ku, Ka-band), vehicle speed detection, closed range targeting radar, SHF, RF engineering and millimeter waves (30–100 GHz). With the utilization of half ground structure the designed antenna averts a major surface-wave loss to obtain the multiband behavior for the given design structure. The presented strip line antenna has reasonably good gain and low VSWR $\pmb{(< 2)}$ for all operating bands.

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

半接地结构的多波段带状线天线

本文给出了所设计天线在地和贴片同时激励下的辐射特性。设计的天线在1 - 100ghz频率范围内工作于多个频段。在2.9 ~ 3.9 GHz、9.5 ~ 10.35 GHz、15.15 ~ 17.95 GHz和20.45 ~ 23.2 GHz频率范围内，前四种谐振模式的分数带宽依次为29.8%、8.54%、16.23%和12.6%。该天线的实际实现适用于WiMAX (3.5 GHz)、卫星通信(S、X、Ku、ka波段)、车速检测、近距离目标雷达、SHF、射频工程和毫米波(30-100 GHz)。设计的天线采用半接地结构，避免了大量的表面波损耗，从而获得了给定设计结构的多频段性能。所提出的带状线天线在所有工作波段均具有较好的增益和较低的驻波比$\pmb{(< 2)}$。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文去求助

来源期刊

2018 International Conference on Computer Communication and Informatics (ICCCI)

自引率

0.00%

发文量

期刊最新文献

Critical review of machine learning approaches to apply big data analytics in DDoS forensics Detection of the effect of exercise on APG signals Categorisation of security threats for smart home appliances Rotation-based LTE downlink resource scheduling using queue status monitoring Design and Analysis of Booth Multiplier with Optimised Power Delay Product