Network Design for LTE-Pro

Abstract

This paper presents the design of the LTE-Pro network in the combination of LTE-LAA and LTE-LWA. By designing appropriate distance, density as a ratio and bandwidth allocation between 3 technologies in order to find the suitable cell location that enables the high throughput. From the variation between LWA (Wi-Fi Access point) or LAA (eNB) and Base Station (BS) to find Inter-Cell Interference Coordinate (ICIC) from the nearby BS via signal to interference plus Noise Ratio (SINR). The assumption that LAA node and LTE node had different radius, while LWA was randomly distributed between the distance D1 and D2, respectively. Then the ratio number of nodes and allocate frequencies bandwidth between 3 technologies. By using MATHLAB to simulate the operation of the LTE-Pro network. The results show that the design of the pico LTE-pro network with the range D1 is 3 : 4 of the LAA radius, and D2 is 4 : 5 of the LTE radius. The node ratio and the bandwidth allocation of LTE : LAA : LWA is 2 : 2 : 10 and 2 : 4 : 4 respectively are factors that affects the performance of LTE-Pro and will improve LTE-Pro network performance.