Propiedades ópticas y estructurales de las películas de óxido de silicio rico en silicio obtenidas por la técnica HFCVD

Nora Castillo-Tépox, J. A. Luna-López, José Álvaro David Hernández-De la luz, K. Monfil-Leyva
{"title":"Propiedades ópticas y estructurales de las películas de óxido de silicio rico en silicio obtenidas por la técnica HFCVD","authors":"Nora Castillo-Tépox, J. A. Luna-López, José Álvaro David Hernández-De la luz, K. Monfil-Leyva","doi":"10.35429/jsl.2019.20.6.9.14","DOIUrl":null,"url":null,"abstract":"In this work we present the results of the analysis obtained from the deposit and characterization of thin films of silicon rich oxide (SRO). The films were obtained by hot filament chemical vapor deposition (HFCVD) technique, such films were deposited on silicon substrates p-type. The deposit of thin films was realized considering different distances from source to substrate (DFS) which were 3, 4, 5 and 6 mm. The quantity of precursors (SiO2) was controlled by the distance from the filament to the source, which was 6 mm for this work, the filament was held at 2000°C. A constant 3-minute deposit time was maintained, and the hydrogen flow level was 10 sccm. The films thickness was obtained by using the profilometry technique, the thickness range was from 200 to 600 nm. The vibrational molecular modes of the SRO films were obtained by Fourier Transform Infrared Spectroscopy (FTIR). The films of 3 mm DFS exhibit an optical transmittance of 90%. The optical energy band gap of the thin films varies from 2.2 to 3.3 eV. When an annealing process at 1000°C was carried out for one hour, the SRO films increase their photoluminescence by an order of magnitude approximately.","PeriodicalId":192509,"journal":{"name":"Revista de Simulación y Laboratorio","volume":"89 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Revista de Simulación y Laboratorio","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.35429/jsl.2019.20.6.9.14","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In this work we present the results of the analysis obtained from the deposit and characterization of thin films of silicon rich oxide (SRO). The films were obtained by hot filament chemical vapor deposition (HFCVD) technique, such films were deposited on silicon substrates p-type. The deposit of thin films was realized considering different distances from source to substrate (DFS) which were 3, 4, 5 and 6 mm. The quantity of precursors (SiO2) was controlled by the distance from the filament to the source, which was 6 mm for this work, the filament was held at 2000°C. A constant 3-minute deposit time was maintained, and the hydrogen flow level was 10 sccm. The films thickness was obtained by using the profilometry technique, the thickness range was from 200 to 600 nm. The vibrational molecular modes of the SRO films were obtained by Fourier Transform Infrared Spectroscopy (FTIR). The films of 3 mm DFS exhibit an optical transmittance of 90%. The optical energy band gap of the thin films varies from 2.2 to 3.3 eV. When an annealing process at 1000°C was carried out for one hour, the SRO films increase their photoluminescence by an order of magnitude approximately.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
HFCVD技术制备的富硅氧化硅薄膜的光学和结构性能
在这项工作中,我们介绍了富硅氧化物(SRO)薄膜沉积和表征的分析结果。采用热丝化学气相沉积(HFCVD)技术制备了p型硅衬底薄膜。在源底距离(DFS)分别为3、4、5和6 mm的情况下,实现了薄膜的沉积。前驱体(SiO2)的数量由灯丝到光源的距离控制,该工作为6 mm,灯丝保持在2000°C。保持恒定的3分钟沉积时间,氢气流量为10 sccm。采用轮廓法测定了薄膜的厚度,厚度范围为200 ~ 600 nm。利用傅里叶变换红外光谱(FTIR)获得了SRO膜的振动分子模式。3 mm DFS薄膜的透光率为90%。薄膜的光能带隙在2.2 ~ 3.3 eV之间变化。当在1000℃下退火1小时时,SRO薄膜的光致发光大约增加了一个数量级。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Production of volatile compounds and lipopeptides as antagonistic mechanisms of two Bacillus strains towards phytopathogenic fungi Analysis of thermoelectrics used in the aerospace industry for power generation by the seebeck effect Control of a CNC laser engraver machine for non-metallic materials Comparison of Vegsyst and Hortsyt models: Two models of growth of greenhouse crops Preparation of catalytic materials for obtaining Acrylic Acid from Ethylene and Carbon Dioxide
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1