Evaluation OF Flexural and Water Absorption Properties of Short Kenaf Fiber Reinforced Green Composites

K. Kumar, K. R. N. Reddy, S. Sripathy
{"title":"Evaluation OF Flexural and Water Absorption Properties of Short Kenaf Fiber Reinforced Green Composites","authors":"K. Kumar, K. R. N. Reddy, S. Sripathy","doi":"10.11127/IJAMMC.2013.07.06","DOIUrl":null,"url":null,"abstract":"The present work study flexural behavior and water absorption properties of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and water absorption tests are carried out as per ASTM standards. The flexural strength and flexural modulus and water absorption behaviour of composite lamina are evaluated. Effect of Fiber surface Treatment on flexural properties and water absorption behaviour is also observed. .The Flexural Strength is increased by 13.8%, 12.8%, and 1.6% for Kenaf T-4 mm laminate, Kenaf T-8 mm laminate, Kenaf UT-4 mm laminate respectively when compared to resin lamina. . But it is observed that the Flexural Strength is decreased by 4.4% for Kenaf UT-8mm laminate when compared to resin lamina. Surface treatment of fiber had a significant effect on fiber/matrix adhesion due to this there is an increase in Flexural strength. Water Absorption capacity is less for Kenaf T-8mm laminate when compared to other composite laminates but it is high when compared to pure resin laminate..","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"7 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-08-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"11","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Advanced Materials Manufacturing and Characterization","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.11127/IJAMMC.2013.07.06","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 11

Abstract

The present work study flexural behavior and water absorption properties of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and water absorption tests are carried out as per ASTM standards. The flexural strength and flexural modulus and water absorption behaviour of composite lamina are evaluated. Effect of Fiber surface Treatment on flexural properties and water absorption behaviour is also observed. .The Flexural Strength is increased by 13.8%, 12.8%, and 1.6% for Kenaf T-4 mm laminate, Kenaf T-8 mm laminate, Kenaf UT-4 mm laminate respectively when compared to resin lamina. . But it is observed that the Flexural Strength is decreased by 4.4% for Kenaf UT-8mm laminate when compared to resin lamina. Surface treatment of fiber had a significant effect on fiber/matrix adhesion due to this there is an increase in Flexural strength. Water Absorption capacity is less for Kenaf T-8mm laminate when compared to other composite laminates but it is high when compared to pure resin laminate..
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
短红麻纤维增强绿色复合材料的弯曲和吸水性能评价
本文研究了短红麻纤维增强复合材料的抗弯性能和吸水性能。纤维在2% NaOH溶液中进行室温化学处理。在本工作中使用了4mm和8mm的短纤维。复合片材采用异苯二甲酸聚酯树脂手工成型制备。弯曲试验和吸水试验按ASTM标准进行。对复合材料的抗弯强度、抗弯模量和吸水性能进行了评价。结果表明,红麻t - 4mm层压板、红麻t - 8mm层压板和红麻ut - 4mm层压板的抗弯强度比树脂层压板分别提高了13.8%、12.8%和1.6%。但经观察,红麻UT-8mm层压板的抗弯强度比树脂层压板降低4.4%。纤维的表面处理对纤维/基体的粘附性有显著影响,因此纤维的弯曲强度有所增加。与其他复合层压板相比,红麻T-8mm层压板的吸水能力较低,但与纯树脂层压板相比,吸水能力较高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Effect of Pouring Temperature on the Hardness and Wear Resistance of Bronze CuPb10Sn8Zn2 Haz Formation And Analysis In Flux Assisted Gtaw Evaluation Of Microstructure And Mechanical Properties Of Explosively Welded Aluminium Alloy And Low Carbon Steel Plates The Scope of Machining of Advanced Ceramics by ElectroDischarge Machining and Its Hybrid Variants Analysis of a stress concentration factor for a plate with varying loading conditions- finite element approach
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1