Heat resistance and thermomechanical behaviour of ultralow and zero cement castables

Abstract

Abstract Knowledge of relative heat resistance as well as thermo-mechanical behaviour of refractory castables is very important for their use as linings in high temperature furnaces and refining vessels in the metallurgical, cement, and petrochemical industries. The present work aims at studying these properties for different types of refractory castable. Two classes of castable were prepared, namely ultralow and zero cement, containing either high alumina cement or hydratable alumina as bonding agent. For each class, two different castable systems were prepared, one containing an alumina-silica mixture in its matrix and the other containing magnesia-alumina. In all castables studied, calcined alumina was used as aggregate. The prepared castable samples were subjected to firing temperatures up to 1500°C. Relative heat resistance, bending strength before and after thermal cycling, hot modulus of rupture, and creep deformation were measured according to international standard specifications. It was concluded that a limited content of cement (ultralow cement castables) is beneficial with the magnesia-alumina mix in the matrix owing to the formation of calcium hexaluminate-magnesium aluminate-corundum (matrix advantage system) that results in excellent relative heat resistance as well as thermome-chanical properties. Zero cement castables on the other hand are recommended for use with the alumina-silica mixture, since the absence of cement improves the chances of mullite formation without glassy phases, thereby enhancing the properties of such refractory castables.