Automated surface defect inspection system for capacitive touch sensor

Abstract

Nowadays, touch panel is used as the interface of many portable consumer electronic products, such as smart phone, digital camera, GPS, and notebook. To ensure the quality of touch panel, it is necessary to inspect the serious defects during the production process. The manufacturing processes of the capacitive touch panel are complicated. The touch sensor is one of the most important components because it directly defines the function of touch panels. The quality of the touch sensor will greatly influence the overall quality and cost of the touch panel. Regular textures can be found on the touch sensor, and it would increase the workload of manual inspection. The automated machine vision can be applied to improve these problems if a good defect detection algorithm can be provided. This research develops an automated surface defect inspection system for capacitive touch sensor by using several image processing methods. First, Fourier transformation and a multi band-pass filter is applied to filter out regular texture. Second, based on Canny edge detection, binarization, and morphology method, the defects can be detected. 60 touch sensor images of size 640×320 are tested. The average accuracy is 96.67% and the processing time is 0.15 seconds for each image.